Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LRM1250W 01

LRM1250W 01 (LRM1250W/01) LG Microwave - Overview

Get Parts and Repair Help for LRM1250W 01

If you know the microwave repair part you need, you can browse the list of all parts on the LRM1250W 01, or you can search by name or part description. You can also find your part by where it is located on the LRM1250W 01 by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your microwave. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$8.63

Turntable Assembly

The turntable support assembly is also known as a roller guide and fits under the cooking tray and is used to support the tray and to engage the rotating coupler. The support assem...

$11.85

Motor, AC Synchronous

$4.35

Fuse,Time Delay

$4.35

Spring

$5.72

Cable,Assembly

Button

$4.35

Screw,Tapping

$5.72

LAMP,INCANDESCENT

$113.99

Magnetron

$17.98

Capacitor,High Voltage

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Motor Burned Out On Turntable

  • Customer: Steven from Oak Forest, IL
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 32 of 40 people found this instruction helpful
My 8 year old daughter cleaned the inside of the microwave with enough water to rival a tsunami. Resulted in a clean microwave with a fried out motor that no longer revolved. Part came quickly. Took cover and bottom off to get to the part. One screw held it on and a plug. Removed those, put on new part and she was good to go. No trip to home depot toda read more

Arcing had caused burned turntable and melted connection to sec. motor.

  • Customer: John from MOUNTAIN VIEW, CA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 4 of 4 people found this instruction helpful
Note: also had to replace turntable. Removed top cover using secure driver set. Placed microwave on it's front, using a soft towel. Removed edge screws from bottom plate (leaving 4 screws in center attached to heavy transformer). Separated bottom plate from body of microwave (leaving transformer wires still attached) exposing Synchronous motor. Removed t... read more

blew fuse

  • Customer: larry from LUCERNE, CA
  • Difficulty: Really Easy
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 2 of 2 people found this instruction helpful
tested cap. with ohm meter which showed a short. A new HV cap., a fuse and it is working fine again. read more