EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

LRFD25850ST LG Refrigerator - Overview

Models starting with LRFD25850ST

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Crisper Drawer Front – Part Number: 3551JJ2019D
No Longer Available
Crisper Drawer Front
★★★★★
★★★★★
(63)
Part #3551JJ2019D
This refrigerator crisper drawer front is used on the opti-bin crisper drawer and is compatible with your refrigerator. This specific model includes a humidity control and a clear plastic window. This part is white and measures about 15 inches wide and 4 inches high. The purpose of this part is to sit at the front of the crisper drawer. This part will allow the user to regulate the humidity levels within the compartment that holds your vegetables and fruit, and will keep your produce as fresh as possible. You will not need any tools to replace this part.
Refrigerator Door Switch – Part Number: 6600JB1010A
$24.67
In Stock
Refrigerator Door Switch
★★★★★
★★★★★
(98)
Part #6600JB1010A
The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on when the door is closed, you could have a faulty switch. The switch is spring-loaded and is a generally closed type of switch meaning there should be no continuity when the button is pushed, and continuity through the switch when it is no longer engaged. This plastic, white, OEM switch is sourced directly from the manufacturer, is sold individually and is easy to replace. The repair usually takes less than 15 minutes and requires a flat-blade screwdriver and needle-nose pliers.
Plastic Tube - 5/16 Inch – Part Number: MJU62070602
$18.22
In Stock
Plastic Tube - 5/16 Inch
★★★★★
★★★★★
(24)
Part #MJU62070602
This water tube, or plastic tube, is used in refrigerators and freezers. The tube ensures water is directed to parts of the refrigerator that need it, such as the water dispenser and ice maker. If you find that your current one is leaking or broken in any way, replacing the tube can fix this problem. Make sure to unplug the appliance from the power source before you start this installation project. Refer to the diagram provided by the manufacturer for further instruction and accurate guidance.
Lower Shelf Frame - White – Part Number: 3550JJ0009A
No Longer Available
Lower Shelf Frame - White
★★★★★
★★★★★
(14)
Part #3550JJ0009A
This is a lower shelf frame. You may also know it as a refrigerator door cover. This part is the frame only, as the glass is not included. The frame is white and measures about 33 inches wide, and 18 inches long. To install this part, note that you will need your original rollers and screws, or you will need to purchase new ones. This piece has rail brackets that are located underneath the cover, which will allow the drawer to slide in and out on the rails.
Refrigerator Water Filter LT600P – Part Number: 5231JA2006F
$68.18
In Stock
Refrigerator Water Filter LT600P
★★★★★
★★★★★
(13)
Part #5231JA2006F
This refrigerator water filter is designed to improve the taste and odor of both water and ice by reducing a wide range of contaminants. Utilizing an activated carbon block filtration method, it effectively captures impurities such as lead, chlorine, mercury, cysts, asbestos, and particulates, while allowing fluoride to pass through. The filter is certified to meet NSF/ANSI Standards 42 and 53 for water purification, ensuring reliable performance and safety. With a lifespan of approximately six months or 300 gallons—depending on water quality and usage—it provides consistent filtration and supports the overall efficiency of your refrigerator’s water system.
Tray Cover – Part Number: 3551JJ2021A
No Longer Available
Tray Cover
★★★★★
★★★★★
(14)
Part #3551JJ2021A
This tray cover, also known as the front drawer cover, fits on the front of the bottom drawer in your refrigerator. It is made of plastic and is white and clear in color. The cover creates a seal in your drawer so the temperature and humidity can be properly maintained for fresh food products.
Door Stopper – Part Number: 4620JJ2009A
$15.00
In Stock
Door Stopper
★★★★★
★★★★★
(8)
Part #4620JJ2009A
The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening and hitting the side of the refrigerator cabinet. If you find your door hits and scratches your lower cabinet when you open your fridge door, installing this part can be a solution to this problem. Make sure to unplug your appliance from the power source before installing this part and safely store food to prevent it from deteriorating. Refer to the diagram provided by the manufacturer for further instruction.
Door Shelf Bin – Part Number: AAP73871501
$44.23
In Stock
Door Shelf Bin
★★★★★
★★★★★
(7)
Part #AAP73871501
Sold individually.
Push Button Switch – Part Number: 6600JB3007E
$37.54
Special Order
Push Button Switch
★★★★★
★★★★★
(5)
Part #6600JB3007E
This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light comes on. When you close the door the switch is pressed in, and the light turns off. You may need a putty knife to remove your old switch.
Freezer Door Gasket – Part Number: MDS38201426
$80.82
In Stock
Freezer Door Gasket
★★★★★
★★★★★
(5)
Part #MDS38201426
Frost near the door or a freezer that runs often may have a damaged door seal. The flexible gasket blocks room air and moisture from entering the cold compartment. First clean the seal and contact surface, then check the hinges and door fit. Match the replacement to the complete freezer model and door position. If shipping leaves folds, soak the gasket in warm water for 5 to 10 minutes or use a hair dryer on low. Do not overheat the rubber. Smooth each side, close the door, and test the seal with a strip of paper.
Cam,Shaft – Part Number: 4430JJ2004B
No Longer Available
Cam,Shaft
Part #4430JJ2004B
The purpose of the door latch cam is to keep the door latched when you shut it. If your door is not staying shut, you may need to replace the door latch cam. This part is made of white plastic and is about 2 inches in length. The door latch cam is located at the top of the door, and you will need to remove the trim that covers the gasket in order to access the door latch cam. To complete this repair, you will need a flat blade screwdriver to pop out the plastic tabs holding the gasket in place. This part is sold individually.
Refrigerator Camshaft – Part Number: 4430JJ2004A
No Longer Available
Refrigerator Camshaft
Part #4430JJ2004A

Common Symptoms of models starting with LRFD25850ST

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Remove and replace light switch
45 of 89 people found this instruction helpful.
  • Debbie from Waltham, MA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator.
Was this helpful?
Thank you for voting!
Replace Thermistor in back of freezer
18 of 25 people found this instruction helpful.
  • Scott from JUPITER, FL
  • Easy
  • 1- 2 hours
  • Pliers, Screw drivers
Turn off power, remove upper and lower drawers (may need to open upper refrigerator doors to remove large freezer bin,) remove drawer supports (upper and lower), remove rear freezer panel (trick is to loosen 4 screws on fan bumpout to get the panel to come free from the freezer side wall), test thermistor with multimeter (should have cont inuity or near zero resistance across 2 orange fuse wires) before cutting zip ties, cut zip ties holding Thermistor in place, remove old Thermistor, install new Thermistor, install new zip ties, replace rear freezer panel, install upper and lower drawer supports, install drawers, turn on power, should be fixed if error code doesn't return after 6 hours.
Was this helpful?
Thank you for voting!
tank assembly cracked/leaking
12 of 17 people found this instruction helpful.
  • tim from olive branch, MS
  • Easy
  • Less than 15 mins
  • Screw drivers
Ordered a new tank assembly, but the new part also leaked because it had a hole in it. Ordered another that worked fine. Used a flat head screwdriver to remove the clips covering the screw holes to the tank assembly cover, then a phillips to remove the cover screws and the screws retaining the tank. Did not use the tubing that came wit h the new tank (removed it by taking out the neck clip then simultaneously pushing back on the neck piece while pulling out the hose). Used this same procedure to remove the old tank at both positions. Installed the new tank, replaced the clips, pressurized/tested the system and put the cover back on. Overall less than a 5 minute job...except for the extra week waiting for a good part.
Was this helpful?
Thank you for voting!