The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your applian...Read morece will not heat properly. It is made of metal and is approximately 1 inch in diameter. This part is sold individually. It is recommended to order a spare, especially if you commonly use the self-cleaning function in your oven.
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is...Read more stable. This approximately 2-inch leveling leg is sold individually, so if your range has multiple legs that are broken or missing, consider how many legs you need to order.
Upgrade your oven with this durable gliding shelf rack, designed to provide a stable surface for baking, roasting, and broiling. Its smooth sliding design makes it easy to insert and remove dishes, offering convenience and efficiency during cooking. Built to support heavy cookware, this rack measures approximately 24 3/8" x 16 1/2" and fe...Read moreatures a sturdy construction for long-lasting performance. Cleanup is simple thanks to its smooth finish, making it a practical and reliable addition to your kitchen. Installation is quick—just slide the rack into the designated oven supports for immediate use.
This transparent inner door glass is designed for LG range ovens and serves as a key component in maintaining heat insulation while allowing visibility into the oven during cooking. Made from heat-resistant material, it helps retain internal temperatures for consistent baking and roasting performance. Replacing a damaged or cracked inner ...Read moreglass restores the oven’s energy efficiency and ensures safe operation. This OEM replacement part is manufactured to fit specific LG models and is intended for use when the original glass is chipped, broken, or compromised. Installation typically involves removing the oven door, disassembling the inner panel, and securely fitting the new glass in place. Always confirm your oven model before installation to ensure compatibility.
This black touchpad and control panel assembly is designed for select electric ranges and ovens, providing easy control of oven settings and temperature. It helps resolve common issues such as unresponsive or malfunctioning buttons and display problems, restoring normal operation. Be sure to verify your appliance model to ensure proper compatibility before purchasing.
This radiant heater may also be known as a radiant surface element and is a part for your range. The function of this heater is to supply heat to the cooking area that is on the top of the range. This piece is roughly 9 inches long, and 7 inches wide. The most common symptom for needing to replace your radiant heater is if your burner is ...Read morenot heating. Before replacing this part, it is always a good idea to test it for continuity. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.
This radiant surface element is a genuine OEM replacement for select LG electric ranges, designed to generate heat beneath the glass cooktop for a single burner. It ensures fast, even heating for efficient cooking and restores proper performance when an existing element is worn or damaged. Common signs of failure include burners that heat...Read more slowly, unevenly, or not at all, or visible damage to the element. Replacing this part helps maintain consistent cooking results and reliable operation. For safety, disconnect power before installation and handle the component carefully to avoid damage.
This oven and range display control board manages key cooking and control functions, acting as the main interface between the user and the appliance. It regulates oven temperature, controls cooking time and settings, and processes user inputs through the display and touch controls. When this component begins to fail, symptoms may include ...Read morea non-responsive or erratic display, inaccurate or fluctuating temperatures, or touch controls that do not respond as expected. Replacing a defective control board can restore accurate temperature regulation, reliable operation, and full control of oven functions.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven would not reach set operating temperature
3 of 4 peoplefound this instruction helpful.
Charles from Camden, AR
Really Easy
Less than 15 mins
Pliers, Screw drivers
Removed the back of the Range. Removed one wire at a time from the old PCB and placed it in position on the New PCB. Then secured the New PCB in the holder.
Was this helpful?
Thank you for voting!
Glass heating element not working
2 of 2 peoplefound this instruction helpful.
Paul from TRUMBULL, CT
Very Easy
30 - 60 mins
Socket set
Very easy.1: Shut power to stove. 2: Remove 3 hex screws from oven to range top at underside of top. 3: Raise to from front and disconnect multi- connector at right rear of top. 4: flip over top and demoed 4 screws on hold down strap at each side. 5: Remove element from under strap. 6: Disconnect element from wir
... Read morees./ remember where wires were connected. Connect multi connected from stove. 7: Replace strap and flip top, screw it back on, put power back on. Only about 30 minutes even if you get a coffe break. Don’t even have to move stove.
Read less
Was this helpful?
Thank you for voting!
Thermostat needed to be replaced
8 of 27 peoplefound this instruction helpful.
Denise from NORTH BEACH, MD
Really Easy
Less than 15 mins
Screw drivers
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order
... Read more from PartSelect again.