LNC8748A80 Admiral Dryer - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Dryer door seal broken
It was easy. Just removed the old seal and plugged the new one in place. Took less than 3 minutes
Parts Used:
-
Leo from Belle Chasse, LA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Had to align tabs on the seal, which are differently spaced, with the holes in the dryer door.
-
Thomas from Dennisville, NJ
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:15 - 30 mins
3 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door seal was dry rotted
-
Kim from North Windham, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
seal was loose and letting air escape
Pulled the old one off .Dry fitted the new one and pushed the retainers in place,took about 5 minutes.thank you.
Parts Used:
-
David from Hampton, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Door seal beginning to rot
PS2031037 Door Seal We were amazed at how quickly to find the site, order the part, RECEIVE the part. In just a matter of a few days, dryer was once again functioning properly. Seldom do Retailers get it, YOU GUYS GOT IT! Thanks very much
Parts Used:
-
Patricia from dumfries, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
old door seal came off and tore up
-
KIenny from Bloomington, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!
Old seal broke lose
At first I thought I had the wrong part. But a quick call to the service number solved the problem. Seems the only part now available is a double wide strip with two sets of molded clips. Simple solution was to pull the strip apart into two. Worked like a charm.
Parts Used:
-
George from Phoenix, AZ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Was this instruction helpful to you?
Thank you for voting!