Models > LMVM2085SW

LMVM2085SW (AWHELGA) LG Microwave - Overview

Sections of the LMVM2085SW

[Viewing 7 of 7]
Keep searches simple, eg. "belt" or "pump".
Micro Switch – Part Number: 3B73362F
Micro Switch
★★★★★
★★★★★
(12)
PartSelect #: PS3522738
Manufacturer #: 3B73362F
This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. This door switch is approximatel...
$11.28
  On Order
Light Bulb - 120V 30W – Part Number: 6912W1Z004B
Light Bulb - 120V 30W
★★★★★
★★★★★
(9)
PartSelect #: PS3530415
Manufacturer #: 6912W1Z004B
This is a light bulb and it is a part for your microwave. This bulb uses 30 watts, operates on 125 volts, and is an incandescent lamp. The function of this bulb is to illuminate the surface underneath...
$13.94
  In Stock
Charcoal Filter – Part Number: 5230W1A003A
Charcoal Filter
★★★★★
★★★★★
(14)
PartSelect #: PS3527523
Manufacturer #: 5230W1A003A
This is an authentic LG charcoal filter for your microwave, sourced directly from the manufacturer. It is designed to remove odors from the air that circulate through your microwave vent. It measures ...
$41.90
  In Stock
Micro Switch – Part Number: 6600W1K001R
Micro Switch
PartSelect #: PS3598700
Manufacturer #: 6600W1K001R
This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or cl...
$8.67
  In Stock
Locker – Part Number: 4026W2A019A
Locker
★★★★★
★★★★★
(15)
PartSelect #: PS3522838
Manufacturer #: 4026W2A019A
The locker, or door latch assembly fits to the inside of the microwave door, and keeps the door closed. If the door on your microwave oven doesn’t appear to close properly, you may have a problem with...
$8.17
  In Stock
Air Duct Bracket – Part Number: 4810W1A151A
Air Duct Bracket
★★★★★
★★★★★
(2)
PartSelect #: PS3523851
Manufacturer #: 4810W1A151A
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be...
$21.24
  In Stock
Microwave Surface Light Lens – Part Number: 3550W2L001A
Microwave Surface Light Lens
PartSelect #: PS3520155
Manufacturer #: 3550W2L001A
This light bulb lens cover is made of high quality clear plastic, and fits over the bulb inside the microwave. This part has been redesigned with 3 mounting holes to improve quality. Please note that ...
  No Longer Available
Rivet – Part Number: 4051W3A001A
Rivet
★★★★★
★★★★★
(1)
PartSelect #: PS3522869
Manufacturer #: 4051W3A001A
$7.24
  In Stock
Fuse,Time Delay – Part Number: 3B74133Q
Fuse,Time Delay
★★★★★
★★★★★
(3)
PartSelect #: PS3522743
Manufacturer #: 3B74133Q
The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a power surge, in ord...
$7.73
  In Stock
Lamp Holder – Part Number: 6620G00007B
Lamp Holder
★★★★★
★★★★★
(2)
PartSelect #: PS3529342
Manufacturer #: 6620G00007B
This genuine OEM light socket provides power to the light bulb in your microwave while holding it in place. This light socket is two pronged and the bulb should screw easily into it. If your light bul...
$21.58
  In Stock
Holder,Cook Auxiliary – Part Number: 4930W1A069A
Holder,Cook Auxiliary
★★★★★
★★★★★
(2)
PartSelect #: PS3524335
Manufacturer #: 4930W1A069A
$14.25
  In Stock
Screw,Tapping – Part Number: 1TTL0402818
Screw,Tapping
★★★★★
★★★★★
(1)
PartSelect #: PS3517555
Manufacturer #: 1TTL0402818
$8.17
  In Stock

Questions And Answers for LMVM2085SW

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Symptoms of the LMVM2085SW

[Viewing 5 of 5]
No heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Won’t turn on
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door not closing properly
Fixed by
these parts
Fixing Fixing
Show All
Doesn’t shut off
Fixed by
these parts
Fixing Fixing
Show All
Tray won’t turn
Fixed by
these parts
Fixing Fixing Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Broken door micro switch. (unit does not start heating)
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far left side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Parts Used:
Micro Switch
  • JAMES from BILLINGS, MT
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
30 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the switches in a component that door activates when shut.
I replaced the whole component with all three switches in it even though only one switch was bad . Taking out one switch out of the holder unit would probably have damaged the unit that was holding the switches. Easy install and it works great again .
Parts Used:
Holder Assembly,Locker
  • Jimmy from OZARK, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not start.
diagnosed defective 'door-shut switch' in the switch holder assembly. rather than replace switch, replaced entire locker holder assembly which made for a very simple and easy repair...not to mention very inexpensive.
Parts Used:
Holder Assembly,Locker
  • James from VIRGINIA BCH, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!