This DC motor assembly is a genuine replacement component designed for the outdoor unit of select LG ductless and window air conditioners. It powers the fan responsible for circulating air over the condensing coil, a critical function that supports cooling efficiency and overall system performance. By converting electrical energy into mec...Read morehanical motion, the motor helps maintain proper airflow and temperature regulation. If your air conditioner is not blowing cold air or fails to turn on, a faulty motor may be the cause. Installation should be performed with the power disconnected to ensure safety. This OEM part is engineered for a precise fit and reliable operation, but users should verify compatibility with their specific model before installation due to variations in size and design.
This main printed circuit board assembly acts as the central control hub of the appliance, managing functions, timing, and communication between components. It helps ensure accurate operation and responsiveness to user selections. Replacing a faulty board can resolve issues such as power loss, erratic behavior, or control failures.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
LG Mini Split Air Conditioner Error Code CH 46
23 of 31 peoplefound this instruction helpful.
Malcolm from Mt Pleasant, SC
Really Easy
15 - 30 mins
Screw drivers
Remove the main power disconnect. Remove the top cover and the fan-side side panel. Disconnect the thermister from the main circuit board located under top panel. Remove the two thermister sensors from the holders attached to suction piping. Install the new thermisters and reconnect the harness to the circuit board. Reinstall top cover an
... Read mored side panel. Reinstall main power disconnect. Verify that error code has cleared. Operate the system normally.
Read less
Was this helpful?
Thank you for voting!
Error CH 46 Suction Pipe Thermistor
3 of 3 peoplefound this instruction helpful.
Paula from Yantis, TX
Really Easy
Less than 15 mins
Screw drivers
Download PDF Multi Air Conditioner SVC Manual for LMU187HV,,, Disconnect the Power,,, Remove cover of the Outdoor Compressor, Remove black cover to the electronics board.. Find the Red Plug-in to the existing Suction Pipe Thermistor, replace with the new one, match each sensor (2) follow the leads one by one, remove the old attach the new
... Read more ones... Replace covers then the Disconnect & Waa-Laa,,, Fixed
Read less
Was this helpful?
Thank you for voting!
Noisy motor
1 personfound this instruction helpful.
Robert from Warwick, RI
Easy
30 - 60 mins
Nutdriver, Socket set
Removed front, rear and side panel. matched up connector of old motor to new. unplugged old harness and plugged in new motor before, I installed it to see if it worked. Ran and sounded great. Took old motor off and replaced with new. All good.