Mounted across the upper front of the appliance, the slatted plastic grille covers the vent area while allowing air to pass through. Cracks, warped sections, or broken mounting tabs may leave it loose, create rattling, or expose the space behind it. Replacing a damaged grille restores a secure cover and a neat appearance, while keeping th...Read moree ventilation openings clear for normal airflow during appliance use. This is an OEM part sourced directly from the manufacturer.
Restore visibility in the microwave cavity or over the cooktop with this replacement incandescent lamp. The 30 watt bulb uses a screw base to connect to the light socket and provides illumination when the appliance lighting is activated. A burned out filament may leave the area dark while the microwave continues operating normally. Replac...Read moreing a failed bulb restores light for checking food or viewing the cooking surface below. Disconnect power, allow the lamp to cool, and follow the appliance instructions for access to the bulb. This is an OEM part sourced directly from the manufacturer.
This micro-switch is designed for use in your microwave. The function of this part is to monitor the door latch position and communicate to the electronic control board whether the latch is open or closed. If your microwave does not provide heat, or will not start properly, you may need to replace the micro-switch. This part is approximat...Read moreely 1 inch in length and 3/4-inch in width. It is made of black plastic with two metal prongs. This is an OEM part sourced directly from the manufacturer. This part is sold individually. Be sure to disconnect the microwave from the power source before you begin this repair.
This microwave door interlock switch responds to the door latch, helping prevent cooking operation while the door is open. Its small actuator changes the electrical contact when the door opens or closes. A worn or damaged switch may prevent the microwave from starting even when the door is fully shut. Replacing a faulty switch helps resto...Read morere proper door detection within the safety interlock system. Internal microwave components can retain a dangerous electrical charge after unplugging, so disconnecting power alone does not make them safe to handle. This is an OEM part sourced directly from the manufacturer.
This bracket holds the metal or plastic flapper that closes off the exhaust duct when the fan is not running and opens when the fan turns on. If the exhaust fan on your microwave does not appear to be working, the problem may be with the damper assembly. If the damper does not open and close easily, check for any damage to the bracket, an...Read mored replace if it is damaged or faulty. This genuine OEM exhaust damper measures approximately 12 inches long by 5 inches wide.
This charcoal filter in manufactured to fit a microwave. It removes food odors from the air circulating through your appliance vent. Youi may need to replace this part if you notice odor when cooking your food or if your filter is clogged. It measures approximately 9.5 inches wide and 3 inches tall, and is black in color.
Exhaust air passes through this microwave vent damper when the ventilation fan runs. The metal flap opens with outgoing airflow to let steam and cooking odours enter the exhaust duct, then closes when airflow stops to help limit outside drafts. A bent, warped, or stuck flap may restrict ventilation or allow air to flow back into the kitch...Read moreen. Replacing a damaged damper helps restore free flap movement and proper exhaust operation, providing a movable barrier at the duct opening between fan uses. This is an OEM part sourced directly from the manufacturer.
Electrical overload protection comes from this microwave time delay fuse, rated at 20 amps and 250 volts. It tolerates brief startup current while opening the circuit during a sustained overload or short circuit. A blown main fuse may leave the microwave without power or prevent it from starting. The fuse cannot be reset and requires repl...Read moreacement once it opens. Internal microwave components can retain a dangerous electrical charge after unplugging, so disconnecting the power cord alone does not make internal handling safe. This is an OEM part sourced directly from the manufacturer.
Secure door closure relies on this black plastic microwave door latch hook. Installed inside the door assembly, it engages the latch openings and operates the safety interlock switches when the door closes. A cracked hook or damaged latch may prevent the door from staying shut or keep the microwave from starting. Replacing a damaged latch...Read more helps restore proper mechanical engagement and door operation. The hook moves with the door release mechanism, allowing the door to open when released and latch again when closed. This is an OEM part sourced directly from the manufacturer.
This microwave base plate trim covers the lower front edge of the appliance, giving the exterior a neat, finished appearance. The decorative panel conceals the edge of the base plate and completes the look of the lower front area. Cracks, warping, discolouration, or broken mounting tabs may leave the trim loose or visibly damaged. Replaci...Read moreng a worn or broken panel restores the finished edge and secure attachment, improving the appearance of the microwave without changing its cooking controls or heating operation. This is an OEM part sourced directly from the manufacturer.
This genuine OEM light socket provides power to the light bulb in your microwave while holding it in place. This light socket is two pronged and the bulb should screw easily into it. If your light bulb will not light, check the bulb itself and light socket’s connection. If the socket is broken, or faulty it should be replaced immediately....Read more Make sure to remove the high-voltage capacitor from your microwave before beginning this repair.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bonnie - For model number LMHM2017ST
November 25, 2019
My microwave is 5 years old. Was working great, then out of no where it made a funny noise and stopped. We unplugged, checked the power, plugged in back in and when you open the door, the lite will come on. The keyboard does not respond. The display screen shows: A pic of a fan, pic of a hand turning a dial, has am pm, then 88:88 with oz, kg,lbs all on the top line, bottom line: Pic of a triangle then what looks like 8888888888 with hash marks in them. What do you think is wrong. Ive never had an appliance go bad after just 5 years. Im told that it would cost $100 plus to have it checked out and that doesn't include parts/repairs, and i should just go buy another one. My husband and i are quite handy if this is something we could fix on our own thanks for your time
Hello Bonnie, thank you for inquiring. This sounds like a faulty Magnetron, part number PS3529034 for your model microwave. Most of our customers perform these repairs themselves, and we even have a Youtube channel of repair videos; here is a link: https://www.youtube.com/user/partselect. Good luck with your repair!
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Mark - For model number LMHM2017ST
January 19, 2020
The trim on the front of the extenda-vent got deformed by prolonged exposure of steam from cooking on the stovetop. Ditto for the plastic cover on the control panel (it's buckled now). Are there replacement parts? Thank you.
Hello Mark, thank you for your question. The vent grill is Part Number: PS3535252 and is available for purchase. Unfortunately, the control panel is not being made any more and is listed as No Longer Available/Discontinued. There is no part substitutions listed. I hope this helps.
Was this helpful?
Thank you for voting!
Doug - For model number LMHM2017ST
June 14, 2021
Fan inside of microwave runs when I open the door. Stops when I close it . Other than that ,it appears to work fine
Hello Doug, Thank you for the great question. This normally indicates a defective Micro Door Switch. This microwave door switch provides power to the various components in the microwave when the door is in a closed position, and interrupts power when the door is open. We hope this helps, good luck with this repair.
How much does it cost to buy 2 grease filters for my LG microwave with tax and shipping?
Hello Sue and thanks for writing.
The grease filter part # PS3527528.
. If you would like to place an order with our company or inquire about pricing, availability, and shipping, you will have to contact our customer service. You can do so one of two ways: online: www.partselect.com or telephone: 888-738-487. Thank you.
thank you for contacting us
The plastic plate on the front of the extenda vent is cracked and keeps falling off, is this a replaceable part?
Hello Katherine, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS3535252. Hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave would not rotate or heat up food.
52 of 77 peoplefound this instruction helpful.
Joshua from WHITE LAKE, MI
Very Easy
15 - 30 mins
Screw drivers
After watching a few youtube videos, I used a phillips SD to take controll pannel off to access the switches that sense when microwave door is closed. Swapped out all 3 switched and mocrowave works like new. $20 fix (shipping included)
Broken door micro switch. (unit does not start heating)
37 of 68 peoplefound this instruction helpful.
JAMES from BILLINGS, MT
Very Easy
30 - 60 mins
Screw drivers
Unplug the unit before servicing. Need phillips screwdriver. Open door. Use step ladder to access and remove 2 small screws from top of the room air diffuser at top of unit. Slide diffuser slightly to the left to align the diffuser's plastic tab on the left side to rotate toward you. (The wires for the front control panel are at the far l
... Read moreeft side of this difuser, but difuser is slotted for easy removal). Once the difuser is removed you will see 1 screw at the top that secures the pannel cover on the left side of the unit. Remove screw and slide this panel slightly up and out. This exposes the plastic frame that holds the upper and lower door switches. To locate the door switches and observe how they work, close and open the door and watch the door (bayonets) open and close the micro switches. Do the (red) buttons on top of the switches move up and down when the door bayonets push and release? If the buttons do not "pop" up when opened the switch is defective. The switch frame is secured with 2 screws. Remove screws and rotate the unit out for easy access to the micro switch(s). The internal (spring?) on my unit that is suposed to allow the red (visible) button on top of the switch to "pop" up when the door is opened was broken. Carefully pry the switch outward while being careful to lift the plastic holder-piece that holds the switch in place. Be careful, there is a small pin on the frame, so rotate the switch OUT toward you while lifting (carefully) the plastic holder-piece (you will see it on top of the switch). You can use an ohm meter to test the continuity of the switches. But if the buttons don't "pop" they are defective. Replace switch and reassemble.
Read less
Was this helpful?
Thank you for voting!
Bezel on the fan drawer scratched. Wanted to replace
21 of 26 peoplefound this instruction helpful.
Edward from ESCONDIDO, CA
Easy
30 - 60 mins
Screw drivers
Leave the unit installed. Remove 8 screws, 4 on each side of the bottom of the drawer. It is hinged on the back but front will drop down. Remove screws attached to the white slide rails but hold bezel assembly so the spring metal on each side do no break. Look in assembly from the back to front. With a long Phillips remove the screws hold
... Read moreing the bezel on. 3 screws. Remove old Bezel. Put new on and reassemble using the reverse.