LM2153CMDA-96141005903 (2008-02) Jonsered Lawn Mower - Overview

This Handle Bolt is sourced directly from the original equipment manufacturer for use in various lawn and garden equipment. It is used to secure the upper and lower handles together and is tightened by a knob on the other end. It is made of metal, is black, and is sold individually, not as part of a kit or assembly. This part will need ...Read moreto be replaced when it is worn or damaged and can no longer secure the arms together. No tools are needed to complete this repair. Customers rated this repair as Easy.

This Genuine OEM blade control cable assembly is designed for use with walk-behind and push lawn mowers. Sold individually, it includes a durable metal wire cable with Z-type bent ends, a rubberized protective cover, and a plastic mounting clip. This essential component connects the control handle to the engine brake system, stopping the ...Read moreblade when the handle is released to ensure safe operation. If the cable is broken, the brake may remain engaged even when the lever is pressed. Replacing the cable is a straightforward process that may require a pair of pliers. Begin by identifying where the old cable is attached to the motor assembly and remove it. Install the new cable in the same location, then route it up to the control handle. Insert the Z-shaped end into the hole in the control handle, just as with the original cable. Once both ends are connected, remove the upper mount of the old cable from the handle and secure the new one in its place. Finally, tie the cable in the same manner as the original, ensuring there is enough clearance and free play to prevent over-bending or premature wear. This replacement restores proper blade control and helps maintain safe mower operation.

This genuine replacement part is sourced directly from original manufacturer. It is used on a variety of lawn mowers. This is the knob that helps to secure the upper handle. It is made out of plastic and it is sold individually. When replacing this know you will need a screwdriver for the screw securing the knob.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

This washer is not part of a kit or assembly. It is sold individually. With an O.D. of 1 inch, this OEM replacement part is made of dark grey metal and is used to provide a tight seal between the mower blade and the blade bolt/screw. This part should be replaced if you notice any visible wear, warping, or damage. You will need a wrench or socket set to complete this repair. Customers rate this repair as Easy.

This deflector shield torsion spring is an original part from Craftsman for lawn mowers, rotary mowers, and gas walk behind lawn mowers. This part connects to the hinge rod and allows the shield to hinge down and up. You will need pliers to replace this part. This deflector shield torsion spring is made of metal and sold individually.

This replacement clipping deflector is a genuine OEM sourced replacement part that is specially designed for use with Husqvarna walk-behind lawn mowers. It is mounted to the side of the mower deck for the cut grass to be expelled out of it. This part is made from durable high quality plastic and it is sold individually. Please note the hardware to secure it is sold separately.

This is a genuine Craftsman selector knob that is specifically made for use with a walk behind lawn mower. This selector knob attaches to the adjustment lever giving the user a comfortable grip when adjusting the mower deck to the desired cutting height. This part is made of a durable plastic and is sold individually.

This hinge rod is an OEM part direct from Craftsman for lawn mowers and gas walk behind lawn mowers. This part holds the chute to the hinge bracket, which allows the chute to hinge down and up. It is recommended to review your models diagram to verify the parts compatibility. This part is made of metal and sold individually.

This is a Manufacturer Approved replacement nut for lawn and garden equipment. This item is Metal an is Sold Individually. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt.

This replacement part is supplied directly from the original equipment manufacturer. It is specially designed for walk-behind lawn mowers. The bracket is an important component which helps to provide support for the deflector. This is an identical replacement for a damaged or a missing part that was installed on a new unit. Keep in mind t...Read morehis high-quality hinge bracket assembly is made of durable metal and is sold individually. Make sure to refer to the diagrams of your model for the correct installation of the new part. Note, the hardware to secure it is sold separately.

This is a genuine OEM replacement part used on a variety of Lawn and Garden Equipment. This part is made out of Metal and it is Sold Individually. This steel washer has several applications based on your unit. Please refer to diagrams for proper application.