LM2153CMD961410101-96141010100 (2006-01) Jonsered Lawn Mower - Overview

The Dust Shield is a 6-3/4 inch, black plastic part, used to prevent dust or debris fouling the wheel or axle. It attaches inside of the wheel around the axle. Installation is rated as "Easy" and will require a wrench. If broken, damaged, or worn due to fatigue, you will see visable damage and you may have debris getting caught in the axl...Read moree. If broken, replace it. Refer to your make, model and diagram to make sure you're choosing the right part. This part comes individually sold.

Made of high-quality metal, this hex flange locknut is designed for use with various lawn mowers and ride-on mower/tractor models and is sold individually. This locknut attaches to the end of the carriage bolt and is an important component to the axle assembly. This locknut has a 3/8-inch inner-diameter and is 16 threads-per-inch. To repl...Read moreace this locknut, you will need a wrench, and if there are multiple locknuts on your equipment, they may all need to be replaced.

The E-Ring 7/16 is a 7/16-inch silver, metal part which can be attached to various locations on a variety of equipment to snap into grooves and secure parts into place. This part will require pliers to install. If broken, damaged or worn, there may be a problem with the part it is securing and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part.

It is an authentic OEM sourced replacement part that is specially designed for use with lawn mowers. This is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct application. This screw is made high-quality metal and it is sold individually.

This is an authentic OEM part from Husqvarna for use with Lawn Mowers. The axle attaches the wheel to the lawn mower. The most common reason for replacing the axle is when the axle is damaged and the mower isn't cutting evenly. This part is sold individually. The tools that you will need to replace the axle is a flat-head screwdriver, 9/16 inch nut driver, large flat-head screwdriver.

This authentic manufacturer-sourced component is specially designed for use with Husqvarna, Weed Eater and Poulan riding lawn mowers and garden tractors. It helps to provide a tight seal between connected parts. Please make sure to refer to the appropriate diagrams of your model for the exact location and application of this hardware. Unf...Read moreortunately, over time it may wear out and begin to crack eventually requiring a replacement. Keep in mind this high-quality washer is made of durable metal and is sold individually.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with walk-behind lawnmowers. The special wheel is a complete part assembly that has a geared hub that is used as the drive wheel. This wheel is available as an individual replacement part, please note two wheels are required.

This is an authentic manufacturer-approved part which is specially designed for use with lawn and garden equipment. It helps to provide a tight seal between connected components. Unfortunately, over time it may wear out and it may begin to crack eventually requiring a replacement. Keep in mind this high-quality item is made of durable rub...Read moreber and is sold individually. Please make sure to check the diagrams of your model for the correct location and application of this hardware.

This washer is an OEM direct from Husqvarna. Compatible with many lawn mowers, this metal item helps to secure the wheel to the adjuster assembly. An adjustable wrench is helpful for the repair, and the washer is sold individually.

This is an authentic Husqvarna replacement part, sourced from the original manufacturer for use with walk-behind lawnmowers. The special selector spring is used to adjust the mower deck height at a single adjustment point. This spring is sold individually, please note the springs knob is available separately. Additional replacement parts: • Selector Spring Knob, part number: 532189808

This is an authentic Husqvarna replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The ball bearing is used to limit friction between the rotating trans-axle and the fixed rear wheel adjuster kit. The sealed bearing is available as an individual replacement part.

The front retainer shaft fits between the front shaft assembly and the wave washer. This is an OEM part sourced directly from the manufacturer and used in lawn mowers made by Husqvarna, Poulan, and Jonsered. This part is made of plastic and is sold individually. A screwdriver and a socket set might be necessary during the installation of this part. It may become broken and will need to be replaced.