LFX28968ST (03) LG Refrigerator - Overview

This refrigerator door bin offers a practical solution for organizing jars, bottles, and other frequently used items. Made from durable white plastic with a clear front panel, it fits securely into the door to help maximize storage space and keep contents stable during opening and closing. Designed to fit a variety of refrigerator models,...Read more this bin provides easy access to everyday items while maintaining a clean and streamlined look.

This refrigerator water filter replacement is for 2010 LG refrigerators that have either forward French doors or are the four-door dispensing models. This filter is designed to minimize impurities that can cause ill-tasting water or an unpleasant smell. It reduces sediment, dirt, rust, limescale, sand, and many other contaminants that can...Read more be harmful to your health and the life of your appliance. This filter should be replaced every 6 months or 200 gallons to ensure top quality performance. To remove your unwanted filter, press the push button to open the filter cover (water may spill from the hole), pull out the old cartridge in a downward motion. To install the new filter, make it so the ears are in the horizontal position and push the new cartridge into the housing until it stops. Push the filter upward until it is secure. Click the cover to lock it in place. Run water for approximately 5 minutes to prep the filter for use, and discard water. Reset the “filter reset” button if applicable.

This front plate assembly, also known as a mullion or flipper, is a genuine replacement part designed for select LG and Kenmore French-door refrigerators. It serves a critical function by sealing the gap between the doors, preventing cold air from escaping and helping maintain consistent internal temperatures. Constructed from durable pla...Read morestic, it supports both the performance and appearance of the appliance. A failing mullion may result in poor sealing, visible gaps, increased energy consumption, and potential food spoilage. Replacing this component can restore proper door alignment and improve overall efficiency. Compatibility should be confirmed using your refrigerator’s model number prior to installation.

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as ...Read morethey commonly wear at the same rate. This is about 1 inch long and metallic in color.

This genuine refrigerator door bin provides sturdy, organized storage for bottles, jars, condiments, and other frequently used items. Featuring a white body with a clear front, it installs easily onto the refrigerator door and helps maximize usable storage space while keeping items within easy reach. The bin measures approximately 14.1 inches wide, 7.6 inches deep, and 3.8 inches high.

This door gasket is used to make an air-tight seal for the cabinet when the door is closed

This is an OEM door shelf designed for LG refrigerators. This shelf measures 8 inches deep and 14 inches wide, is made of white and clear plastic, and hooks into the side of the door within the refrigerator. This shelf is used to hold any condiments, cups, or food items that you would need it to hold and secure. If the shelf in your refri...Read moregerator is chipped, cracked, or broken, it will need to be replaced to continue to hold anything.

The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keeps it from opening and hitting the side of the refrigerator cabinet. If you find your door hits and scratches your lower cabinet when you open your fridge door, ...Read moreinstalling this part can be a solution to this problem. Make sure to unplug your appliance from the power source before installing this part and safely store food to prevent it from deteriorating. Refer to the diagram provided by the manufacturer for further instruction.

This is the replacement shelf glass for your refrigerator. It is made of glass and is approximately 31 inches wide and 16 inches long. The shelf glass for your refrigerator slides over the crisper cover and acts as a sort of lid. It also creates a shelf that you can place food and beverages on. If your current shelf insert glass is broken...Read more, this part is the appropriate replacement. Many of our customers have described this repair as easy. To complete the repair, carefully remove the old glass from the frame and replace it with the new pane of glass. This part is sold individually and is an authentic OEM part.

This door basket, also known as a bin or shelf, attaches to the interior of your refrigerator door. It is designed for storing jars and bottles, providing easy access to these items. You will find it positioned on the left-hand side of the door, near the bottom. The basket has approximate dimensions of 7 3/4 by 13 inches and can be effort...Read morelessly removed and reattached for your convenience. This replacement part is sourced directly from its original manufacturer.

This mullion spring is designed for French-door refrigerators to provide tension and stability to the door flap that seals the space between the two doors. Its clockwise winding ensures proper alignment and secure closure, helping maintain a tight seal and consistent internal temperatures. If the mullion is not closing correctly or you're...Read more noticing frost buildup near the dispenser, replacing the spring may restore proper function. Always unplug the appliance before installation.

This ice maker assembly kit is designed to restore reliable ice production in select LG refrigerators by replacing worn or malfunctioning components. The kit includes essential parts such as the ice mold and ejection controls, which work together to manage water intake, freezing, and automatic dispensing of ice cubes. By maintaining consi...Read morestent ice output, it supports everyday use and entertaining needs. Replacing a faulty ice maker can resolve issues such as failure to produce or dispense ice, as well as unusual operational noises. Installation involves removing the old assembly and securely fitting the new unit, ensuring proper alignment and connection to the refrigerator’s water and cooling systems. This repair enhances convenience and restores full functionality to your appliance.