EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

LFTR2045VF Frigidaire Refrigerator - Overview

Models starting with LFTR2045VF

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Condenser Fan Blade – Part Number: 241639502
$30.74
In Stock
Condenser Fan Blade
★★★★★
★★★★★
(4)
Part #241639502
This is a genuine condenser fan blade, which works with refrigerators, freezers and wines and beverage coolers.
CAPACITOR,12UF – Part Number: 297286812
$20.85
In Stock
CAPACITOR,12UF
★★★★★
★★★★★
(5)
Part #297286812
This run capacitor supports the compressor by storing and releasing electrical energy for smooth startup and operation. It helps maintain consistent cooling performance and efficiency. Replacing a faulty capacitor can resolve issues like clicking sounds, failure to start, or reduced cooling.
BULB – Part Number: 5304522314
$49.57
In Stock
Gasket – Part Number: 5304523138
$137.45
In Stock
Gasket
★★★★★
★★★★★
(1)
Part #5304523138
This refrigerator door gasket is a genuine OEM replacement part designed to create an airtight seal around the refrigerator door, preventing warm air from entering and ensuring efficient cooling. Compatible with select models from Frigidaire, Electrolux, White Westinghouse, and Tappan, this gray gasket helps maintain optimal refrigerator performance by reducing energy loss and keeping food fresh for longer. Over time, door gaskets can wear out, leading to temperature fluctuations, increased energy consumption, and potential food spoilage. Replacing a damaged gasket can restore proper sealing and improve efficiency. Before installation, inspect the gasket for any creases or folds that may have formed during shipping. To smooth out any irregularities, soak the gasket in warm water or use a hair dryer on low heat to gently soften the material. To replace the gasket, first remove the old one by gently pulling it away from the door. Align the new gasket along the door’s perimeter, pressing it into place and ensuring a secure fit. Once installed, close the refrigerator door and check for proper sealing to prevent air leaks. Since refrigerator gaskets may look similar but can have slight variations in shape and size, always verify compatibility with your refrigerator model before ordering.
Fan Blade - Black – Part Number: 242219302
$27.54
In Stock
Fan Blade - Black
★★★★★
★★★★★
(2)
Part #242219302
This refrigerator evaporator fan blade is designed to attach to the evaporator fan motor and circulate cold air evenly throughout the refrigerator and freezer compartments. Made from durable black plastic with a four-blade design, it helps maintain consistent temperatures, improves overall cooling efficiency, and reduces frost buildup on the evaporator coils. Replacing a worn or damaged fan blade can resolve issues such as unusual squealing or grinding noises, weak airflow between compartments, or sections of the appliance becoming too warm or too cold. Installation involves removing the interior freezer panel, securing the blade onto the fan motor shaft, and ensuring it spins freely before reassembling the unit.
Refrigerator Bearing – Part Number: 5304522194
$6.55
In Stock
SCREW – Part Number: 5304522279
$7.65
In Stock
SCREW
Part #5304522279
Designed for secure and reliable fastening, this genuine OEM quad hex washer head screw provides the strength and precision needed to hold internal refrigerator components firmly in place. Its durable construction ensures a tight fit for mounting shelves, bins, trim panels, and other hardware, helping maintain proper alignment and structural integrity. Built to meet exact factory specifications, it is an ideal replacement for stripped, worn, or missing screws, restoring stability and ensuring dependable performance throughout your appliance.
BIN – Part Number: 5304524055
$67.05
In Stock
6-Hour Defrost Timer – Part Number: 5304526183
$57.46
In Stock
6-Hour Defrost Timer
Part #5304526183
This refrigerator defrost timer is a key component in the automatic defrost system, designed to regulate the intervals at which the appliance enters its defrost cycle. It temporarily shuts off the compressor and activates the defrost heater to melt accumulated frost on the evaporator coils, ensuring efficient cooling and preventing ice buildup. After a preset duration—typically every six hours—it restores normal operation by restarting the compressor. This OEM part is manufactured for Frigidaire and is compatible with a wide range of models from Electrolux, White Westinghouse, Tappan, and Kenmore. Installation involves accessing the control housing, disconnecting the old timer, and securing the new one using standard connectors.
PAN ASSEMBLY – Part Number: 5304522242
$58.95
In Stock
PAN ASSEMBLY
Part #5304522242
DRAWER,DELI,FULL WIDTH – Part Number: 5304538633
$61.32
In Stock
DRAWER,DELI,FULL WIDTH
Part #5304538633
Introducing the full-width deli drawer from the trusted brand, Frigidaire. This genuine OEM part is designed to accommodate various models of Frigidaire, Electrolux, White Westinghouse, and Tappan appliances. As a well-crafted piece, it ensures the easy storage of meats, vegetables, and snacks in your refrigerator's fresh food compartment. This deli drawer is strategically designed to maintain the same look despite slight variations in size and shape. Please ensure to follow the instructions in your owner's manual while installing this part. Elevate your kitchen utility with Frigidaire's effective, efficient, and durable full-width deli drawer.
Evaporator Fan Shaft Washer – Part Number: 215474201
$32.70
In Stock
Evaporator Fan Shaft Washer
Part #215474201

Common Symptoms of models starting with LFTR2045VF

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fridge started making a loud racket. Condenser Fan Blade then disintegrated to dust and pieces. The plastic had degraded significantly.
4 of 7 people found this instruction helpful.
  • Jack from WALLING, TN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Socket set
The repair itself total time was quick and easy. Since the original fan blade blew apart, it was only a matter of putting the new one on in it's place. This can be done by feeding the blade between the cowling and Condenser coil and applying pressure to get it on the shaft.

If your fan is still on the shaft, simply push it off and extract it the same way. Then place the new one on the shaft.

In my case, since the part would take a couple days to get, and I had food both in the fridge and the freezer, I removed and unplugged the Condenser Fan Motor and the cowling frame and temporarily spliced a small fan I had into the line for the condenser motor. This kept the fridge working long enough to get the replacement part.

Side note. Direction of airflow is towards the Compressor, and draws air across the Condenser coils.

Hope this helps someone. :)
Was this helpful?
Thank you for voting!
New gasket
5 of 10 people found this instruction helpful.
  • Eric from CHESHIRE, CT
  • Very Difficult
  • 30 - 60 mins
First I’ve done this many times no issues. This gasket which finally fit was the worst item and first from partselect. I’ve never had such a hard time getting the gasket to stay in the groove. Softened it and everything. Had to carefully use a plastic shim inch by inch. Bad bad bad!!
Was this helpful?
Thank you for voting!
One blade broke from condenser fan
12 of 32 people found this instruction helpful.
  • Chris from Lockport, NY
  • Really Easy
  • Less than 15 mins
The part i recieved, from parts select was a larger in circumfrence (<1/4) than the original. However i was not aware of this until after i treid to repair it.

I removed the broken fan from the condenser. This was very sipmle.

When i pluged the refridgerator back in to the outlet the fan tried to start up but soon be gan to make aloud noise, due to there not being enough clerance.
Was this helpful?
Thank you for voting!