LFNE5BSP115TW01 Speed Queen Washer - Overview

This inlet hose washer, also known as a high pressure inlet hose washer, is used in washing machines, refrigerators, freezers, and dishwashers. The function of this part is to create a watertight seal in the appliance. If your gasket gets dry and brittle over time it will start to crack and will lose its function. In this case, it is impo...Read morertant to replace it. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance. As a safety precaution, remember to unplug your washer from the power source before beginning.

This screw is well under an inch long, and is made of metal.

Found at the end of the inlet hoses.

This part is sold individually. This nut can be found in various appliances including a dishwasher, air conditioner, washer, dryer, range/cooktop, oven, freezer, range hood, and refrigerator. There is a serrated pattern along the edge of the nut, which helps to avoid loosening while the appliance is in motion. Nuts may corrode or rust ove...Read morer time and will need to be replaced. You will need a wrench to screw the nut into place. This genuine OEM part comes directly from the manufacturer.

This bolt measures 1/4 inch in diameter with a thread count of 20 per inch and a length of 5/8 inch. It holds different parts of your kitchen appliance together, such as panels or handles, to ensure structural integrity. If the bolt is rusted or stripped, parts of your appliance will feel wobbly. Loose or missing bolts can cause the parts...Read more they are holding to detach. Use a wrench to remove any bolts that you need to replace. Take note that this OEM component is sold individually, so consult your user manual to determine the number of bolts your machine needs. Consider purchasing extra bolts if you are replacing one, as these bolts typically wear out at the same time.

This foot pad is just over an inch in diameter. It is all black in color and is made entirely of rubber. This pad is used for the levelling legs of many washing machines.

Red 3M800

This is a lower dishrack assembly for your dishwasher. It slides into place on the lower half of your appliance to hold dishes and other cookware during the dishwashing cycle. This part includes the rollers, also known as wheels, and axles. This model is a light grey/blue in color and is roughly 24 inches long and 22 inches wide. There is one lower dishrack, eight wheels/rollers, and eight axels included in this kit.

This baffle plate and seal gasket deflects water and keeps it from seeping out of the bottom of your D&M design dishwasher. It fits models with a door measuring 21-3/4 inches wide. Use it for your Frigidaire/WCI brand washing machine.