Quick Question!

Have you ever purchased from PartSelect.com before?

Models > LFC20760ST (AST1LGY)

LFC20760ST (AST1LGY) LG Refrigerator - Overview

Get Parts and Repair Help for LFC20760ST

If you know the refrigerator repair part you need, you can browse the list of all parts on the LFC20760ST, or you can search by name or part description. You can also find your part by where it is located on the LFC20760ST by selecting a section below. If you’re not sure which part you need, you can narrow your search by selecting a common symptom and we’ll show you the repair parts most likely to fix your refrigerator. Installation instructions provided by other do-it-yourselfers will help guide you through your repair.

Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$11.85

Switch,Push Button

The interior light in your refrigerator is controlled by a switch that is activated when the door is opened and closed. If your refrigerator light will not turn on, or stays on whe...

$4.35

Handle Screw

This handle screw, also known as a mounting bolt, is a mounting screw to help secure the door handle to your refrigerator door. If your handle is loose, you may just need to tighten the screw. If your screw is missing or broken, it may need to be replaced. There are multiple handle screws on your fridge, please consider ordering extra as they commonly wear at the same rate. This is about 1 inch long and metallic in color.

$4.35

Stopper,Door

The door stop, or door stopper, is used in refrigerators. This door stop helps keep the door in position and in balance. This part is attached to the bottom of the door and it keep...

$69.64

Drawer Rail Guide - Right Side

This guide rail, also known as a drawer slide rail, is a genuine OEM replacement part for the freezer section of your refrigerator. This slide rail supports the storage basket in your freezer, allowing you to slide it open with ease. Our customers have rated this repair as easy.

$4.80

Holder,Cover(Lower)

This lower holder cover is also known as a toe grille clip, or a kickplate clip. It is designed for use with refrigerators. The main purpose of this part is to hold the molding at ...

$4.35

Bush

$8.63

Cam,Shaft

$83.60

Crisper Cover - White

Glass is NOT included. NOTE:As per the manufacture the original support will not work with the updated crisper cover. A new support will need to be ordered.

$4.35

Screw,Customized

$8.63

Cam,Shaft

Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Remove and replace light switch

  • Customer: Debbie from Waltham, MA
  • Difficulty: A Bit Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required: Pliers, Screw drivers
  • 18 of 27 people found this instruction helpful
Video makes it look easy. Kenmore refrigerator does not have "groove" along the right hand side of switch that allows for pushing down on release. Used a thin screwdriver to get under to push while holding switch edge with pliers. Kept slipping. Tape sides to avoid scratching inside of refrigerator. read more

two screws and done

  • Customer: Daniel from TROY, MI
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Screw drivers
  • 2 of 2 people found this instruction helpful
part fit into slot and screwed them down read more

I lost the part in a move.

  • Customer: Kathleen from YUCCA VALLEY, CA
  • Difficulty: Very Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 2 of 2 people found this instruction helpful
It was so easy I opened the package and took part right out and put it on the refrigerator and bolted it down and that's it. read more