LFA5800G0 Whirlpool Washer - Overview

Diagrams for LFA5800G0

See every part. Know exactly what you need.

Parts for the LFA5800G0

$22.52

Lid Switch

★★★★★

(17)

Part #W10820036

This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit...Read more

Read less

$19.30

Drive Block - 2 5/16 Inch High

★★★★★

(2)

Part #WP389140

This washer drive block is an essential component that connects the inner spin basket to the drive shaft, enabling proper spinning during wash and spin cycles. Measuring approximately 2-5/16 inches high, it is designed for large-capacity washers with belt or direct drive systems. A worn drive block can cause loud noises, shaking, poor spi...Read more

Read less

$28.42

Washer V-Style Cogged Tooth Pump Belt

Part #WP95405

$21.45

Center Post Bearing

Part #WP8546455

Sold individually.

Lint Filter - seven inches long

Part #384493

This plastic high impact washing machine lint filter is approximately seven inches long. It is white in color and has been used on Whirlpool/Kenmore brand clothes washers that have been manufactured since 1978.

Belt Drive Motor Kit with Capacitor

Part #285222

This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.

Diverter Valve For Suds Saver

Part #285144

This valve does not contain the solenoid.

PUMP-WATER

Part #350367

IF FAILED PUMP IS DIE CAST, O

KNOB

Part #356500

WATER INLET

Part #366072

HOSE-110.7204600 & 110.7204650

Part #21114

SNUBBER, PLATE

Part #355852

Common Symptoms of the LFA5800G0

How this model fails, and the parts that fix it.

Videos related to models starting with LFA5800G0

Watch our pros, then fix it yourself.

Replacing the Lid Switch

Replacing the Drive Block - 2 5/16 Inch High

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Lid closes, switch wouldn't turn on machine.

31 of 47 people found this instruction helpful.

Kenneth from Wilmington, IL
Easy
1- 2 hours
Nutdriver, Screw drivers, Socket set

Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. ... Read more

Read less

Was this helpful?

Washer would fill up, wash, then stop

22 of 31 people found this instruction helpful.

Glen from Plano, TX
A Bit Difficult
30 - 60 mins
Screw drivers

I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed ... Read more

Read less

Was this helpful?

One day, I found my dryer continued running after I opened the door. And next day, it stopped working at all. I thought it was time to buy a new one, since my dryer had been used for more than 15 years. But I was curious to know what went wrong, and recalled my friend told me he repaired the door

17 of 21 people found this instruction helpful.

Xiaobin from Cordova, TN
Really Easy
Less than 15 mins
Screw drivers, Wrench set

My daughter found the video on youtube, which showed step by step repairing procedures. I just followed it and fixed my dryer in 15 min.

Was this helpful?