LF724S (00724420) Metabo Router - Overview

This is a genuine manufacturer-supplied replacement which is specially designed for use with Metabo power tools. The purpose of a brush is to conduct the crurrent in an electric motor that powers the tool. Unfortunately, the material will wear out and it may cause intermittent performance eventually requiring a replacement. Keep in mind t...Read morehis high-quality brush is sold in a pack of two. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem. Please refer to the appropriate diagrams and the owners manual for the exact location and installation of these components. Not sure if your carbon brush is causing your motor problems? See our power tool repair article: Whodunnit? The brushes or the switch?

This special screw is used to secure blade on Metabo routers. It is an authentic replacement part that is sourced directly from original manufacturer. It is a countersunk torx head screw which is sold individually. You will need a properly sized torx screwdriver when working with this screw.

This special replacement washer is supplied directly from the original equipment manufacturer for use with Metabo angle grinders and routers. It is a standard hardware which has multiple applications depending on your model, please refer to appropriate diagrams for correct location and use of this hardware. Note this durable metal washer is sold individually.

This replacement slider switch knob is a genuine metabo part. It is supplied directly from manufacturer for use with grinders/polishers. It is the slider knob for the main on/off switch of a tool. This slider is made out of black plastic and it is sold individually. Replacing this switch slider should only require a screwdriver. • Ma...Read moreke sure the tool is unplugged • Remove the housing screws • Remove the slider and secure the new one in place • Reassemble and test the unit

It is a genuine item which is supplied directly from the original equipment manufacturer, specially designed for use with Metabo grinders and sanders. The washer is utilized to provide a tight seal between connected parts, please refer to the appropriate diagrams of your model for the correct location and application of this hardware. Kee...Read morep in mind this high-quality component is made of durable metal and is sold individually.

This genuine OEM component is specially designed for Metabo paint removers. It is an identical replacement for a missing or a damaged part that connects the fuel tube. Make sure to refer to the owner's manual for your specific model for the exact location and the correct application of this item. This high-quality product is made of durable plastic and is sold as an individual item.

This high quality replacement switch is used on Metabo power tools. It is an authentic OEM sourced item, not an aftermarket imitation. It is the mechanical switch that allows user to turn the tool on and off. Since switches have moving plastic parts, they will eventually wear out and fail requiring a replacement. Please note, one switch i...Read mores included per order. To complete this repair you will need a screwdriver. • Remove the housing • Disconnect wires from the old switch • Remove the old switch • Secure the new switch in place • Connect wires to it • Reassemble and test the tool

This authentic manufacturer-supplied part is designed for Metabo power tools. Bushings are commonly used to provide a tight fit between connected components. It is made of high-quality rubber material and is sold individually. Make sure to check the diagrams for your model to ensure the correct replacement procedure. You may need a screwd...Read moreriver and a wrench set to take apart and reassemble the housing when performing this repair.