LE52N3AWWFR Midea Dryer - Parts

Over time, the lint filter in your dryer can become clogged or damaged, which may reduce drying efficiency and airflow. Replacing it with a new lint filter assembly (part number 12138200006263) helps maintain proper ventilation and supports safe, effective operation. To ensure a seamless fit, check that your dryer model matches this part before placing your order.

Help the dryer manage heat with a replacement temperature sensor. The sensor checks the air temperature during each cycle and sends readings to the electronic control board. The board uses that information to adjust heating and protect clothing from too much heat. A faulty sensor may cause long drying times, uneven drying, overheating, ea...Read morerly shutdowns, or a no-heat condition. These symptoms can also result from blocked airflow, damaged wiring, or another failed component. Test the old sensor before replacement when possible. Unplug the appliance, shut off the gas supply if needed, and clean the lint screen and exhaust duct before use.

Keep the dryer door closed securely with a replacement fixed seat for the latch system. The seat gives the door catch a firm place to connect when the door shuts. A worn, cracked, or loose seat may allow the door to pop open, sit unevenly, or fail to stay latched. If the door cannot close fully, the appliance may not start because the saf...Read moreety switch does not sense a closed door. Compare the shape and mounting points with the original piece before ordering. Disconnect electrical power before installation, and follow the appliance service guide when removing or fitting the catch.

Protect the dryer from excess heat with a replacement thermostat, also called a thermal limiter. Mounted near the heating or airflow system, it watches the temperature and can interrupt the heating circuit when conditions become too hot. A failed thermostat may leave the dryer without heat or cause it to shut down at the wrong time. Block...Read moreed airflow, damaged wiring, or another heating component can create similar problems, so test the circuit before replacement. Unplug the appliance and close the gas valve, if present, before opening the cabinet. Clean the lint screen and exhaust duct, then follow the wiring diagram during installation.

Long drying times do not always mean the heating element is bad. Blocked airflow, a weak power supply, or a failed safety part can cause similar trouble. Test the heater and related parts before ordering a replacement. Confirm fit with the complete appliance model number. Unplug the dryer and switch off its circuit breaker before opening ...Read morethe cabinet. Keep every wire in its correct position, clean the vent system, and stop if you find burned wires or melted connectors.

Sudden stops or starting problems may point to a damaged safety switch inside the dryer. Its exact job depends on where it is used in the machine. Check the service guide and test the switch and wires before ordering a replacement. Confirm fit with the complete appliance model and part number. Disconnect all power before opening the cabin...Read moreet, and shut off the gas supply when needed. Connect each wire to the correct terminal and replace all covers before testing.

If your dryer drum isn’t spinning properly the motor may need to be replaced. A malfunctioning motor can lead to poor drying performance and increased energy use. This single-phase asynchronous motor is designed to power drum rotation in select dryer models helping restore smooth and efficient operation. Before purchasing please verify yo...Read moreur appliance’s model number to ensure compatibility. Professional installation is recommended to ensure safety and optimal performance.

Safe dryer operation depends on a working cover switch. A worn switch may keep the cycle from starting or cause it to stop without warning. First make sure the door closes fully and nothing blocks the switch area. Check nearby wiring before ordering a replacement. Confirm fit with the complete dryer model number. Disconnect electrical pow...Read moreer before service, and shut off the gas supply when working on a gas dryer. Ask a technician for help if the switch is difficult to reach.

A missing or loose screw can lead to excessive vibration or even detachment of components during dryer operation. This replacement screw is designed to provide a secure fit helping to maintain the stability and performance of your appliance. For optimal results confirm compatibility with your model before purchasing.