The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive heating is detected. This is a genuine part sourced directly from the original manufacturer. You may need to replace this part if your applian...Read morece will not heat properly. It is made of metal and is approximately 1 inch in diameter. This part is sold individually. It is recommended to order a spare, especially if you commonly use the self-cleaning function in your oven.
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the appliance it is in and by working with the control board, the board adjusts the level of cooling or heating through its heating or cooling element...Read more, depending on what is needed. If your appliance is being improperly heated or cooled, the temperature sensor may be to blame, and can be tested with a multimeter to check for continuity to see whether it is defective. Check your user manual for exact placement of this thermistor and any diagnostic information.
The fuse-time delay may also be known as a line fuse or a microwave fuse, and it is a piece for your microwave. The function of this part is to shut off the microwave if there is a power surge, in order to protect your microwave from damage. You should consider having a service technician install this part as the high-voltage capacitors i...Read moren a microwave can contain a very harmful electrical charge, even when the microwave is unplugged and has been inactive for some time. The tools that would be needed to complete this installation include a Phillips screwdriver, an insulated screwdriver, and a pair of pliers.
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and forth. Installing this leg simply requires you to lift on the corner you are installing it under, and then screw it in place until your range is...Read more stable. This approximately 2-inch leveling leg is sold individually, so if your range has multiple legs that are broken or missing, consider how many legs you need to order.
This genuine OEM rack is placed inside your oven cavity, serving as a stable surface for your cookware. It measures approximately 25 inches by 17 inches. The wires can warp due to repeated temperature changes over time. Additionally, heavy or unevenly distributed loads can bend the rack structure, and accidental impacts during cleaning ma...Read morey result in broken rack supports, slides, or tubing. When this happens, it must be replaced. It is important to note that this rack is sold individually.
This radiant heater may also be known as a radiant surface element and is a part for your range. The function of this heater is to supply heat to the cooking area that is on the top of the range. This piece is roughly 9 inches long, and 7 inches wide. The most common symptom for needing to replace your radiant heater is if your burner is ...Read morenot heating. Before replacing this part, it is always a good idea to test it for continuity. To make this installation you will need a Phillips screwdriver, and a 14-inch nut driver.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve - For model number LDE3011ST
February 1, 2020
When i push the start button on high on the front and rear right burners, neither one heat up. The left side is working fine. What could this be?
Hello Steve, thank you for your question. That issue would be caused by either faulty burners, or the burner control switch board. We would recommend testing the elements and if they are fine, the board should be replaced which is PartSelect Number PS3645627. I hope this helps.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Mickey - For model number LDE3011ST
March 8, 2023
I have one burner not functioning, i believe it was slowly starting to fade and now does not emit any heat when turned on. All other 3 burners work appropriately. I'm led to believe that i need a new heating element as opposed to a circuit board as its only one burner. Do you have recommendations on trying to identify what the actual issue is?
Hi Mickey, thank you for contacting us. Most probably, the issue is related to the radiant surface element, part number PS3527756, power 1200W, or another one, part number PS3527757, power 2500W. If this does not fix the issue check the connection of the wire to the required burner. We hope this solves your problem!
I have one burner that clicks on but the heating element doesn't consistently react. Say I place it on 5, it heats up to 5, clicks off, cools and to heat back to 5 it clicks on but the element doesn't become red. It seems to go back and forth like this with it typically not heating at all. The burner usually doesn't come on when turned on either, but if left on you see it heat once in a while as it cycles through its on and off to maintain a temperature.
Also noted that when you shut it off, it no longer notifies you with HS on display for the burner still being a hot surface. Only 1 burner of the 4 acts like this. Heating element seems fine, wondering if i need a new thermostat or another electrical part?
Hi Michelle, thank you for reaching out. Based on the description that you have provided, we would recommend checking the following parts: large surface element, part number PS3527757, and small surface element, part number PS3527756. After checking, you may replace the faulty one. We hope this sorts out your problem!
Please note I recently asked about an issue with an element maintaining heat and kicking on intermittently as it cycles. I have replaced the surface element, large one, with a new one and the issue still consists. Please advise what else could be causing the issue. Thank you!
Hi Michelle, thank you for reaching out again. Based on our research, the issue is probably with the control board, part number PS3646288. We hope this helps!
Was this helpful?
Thank you for voting!
Shirley - For model number LDE3011ST
November 26, 2023
Need the membrane or touchpad panel. Ours is cracked on the cover.
Hello Shirley, thank you for your inquiry. The touchpad membrane you are looking for does not come separately and comes as a part of the touchpad assembly, part number PS3639928. If you require assistance to place an order, please contact customer service!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
wouldn't turn on
2 of 3 peoplefound this instruction helpful.
Michael from MILWAUKEE, WI
Easy
30 - 60 mins
Screw drivers
simply take picture b4 you start then replace same way.
WARNING!!! MAKE SURE YOU HAVE RIGHT PART!! They are very slow to return any type of credit
Was this helpful?
Thank you for voting!
Microwave operated but did not heat
3 of 10 peoplefound this instruction helpful.
Donald from Oak Ridge, TN
Easy
1- 2 hours
Screw drivers
Initial failure of over range microwave Aug 3rd. Control Panel worked but no heat. Took to local LG authoriaed local repair place. They fixed it quickly and we re-installed it. Worked fine for 2 months then had similar failure again. Agaim took to same authorized repairer. They kept unit for 3 months but finally concluded theu could not
... Read more fix it and suggested we contact LG for a partial refund. When they tested the unit during re-assembly in my presence, there was a blue flash and the fuse blew. Since we had built a custom tile mural back splash around this unit, I brought it home, ordered a number of time delay fuses new capacitor and two new high voltage diodes. However, using my Fluke DMM, I checked the existing capacitor and high voltage diode and they checked OK so I just replaced the time delay fuse. The high voltage transformer leads had 2 possible ways to connect to capacitor and diode. Tried one way, plugged unit in and turned it on, and immediatly blew the fuse. Replaced the fuse and reversed the high voltage transformer connections,amd turned unit pn, and it worked perfectly. Since we had experienced several power failures during the time of the original failure, the repairer concluded that power spikes might be at fault, so I also purchased a TrippLite ISOBAR4ULTRA 3300 Joule surge protector between wall outlet and microwave, and re-installed over range. It has worked perfectly since.
Read less
Was this helpful?
Thank you for voting!
Thermostat needed to be replaced
8 of 27 peoplefound this instruction helpful.
Denise from NORTH BEACH, MD
Really Easy
Less than 15 mins
Screw drivers
We had made this determination with the help of a repairman on the phone. I ordered the part and waited for it. It was stuck in West Virginia. After several days after it was expected a repairman fixed my range to the tune of $168. It should have cost $30 (the cost of the part and shipping). Unfortunately I probably won't order
... Read more from PartSelect again.
My Orders
