LAA5800A5 Whirlpool Washer - Overview

Diagrams for LAA5800A5

See every part. Know exactly what you need.

Parts for the LAA5800A5

$22.52

Lid Switch

★★★★★

(17)

Part #W10820036

This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit...Read more

Read less

Water Inlet Valve

★★★★★

(1)

Part #358277

This valve has two ports for water to enter. This valve is compatible with a half inch ID hose and it has two 3/4-11x1/2 NHT hose threads.

$28.42

Washer V-Style Cogged Tooth Pump Belt

Part #WP95405

Belt Drive Motor Kit with Capacitor

Part #285222

This two-speed motor performs 1725 revolutions per minute in one speed, and 1140 revolutions per minute in the other speed. It runs at 1/2 horsepower and carries 115 volts.

KNOB

Part #356500

SWTCH-TEMP

Part #660393

AGITATOR

Part #383951

SWITCH-WL

Part #62968

DISCONTINUED

Part #373088

This Dryer Repair Kit includes a replacement multi-rib dryer belt, 4 drum rollers, 9 triangle clips, 1 idler pulley wheel assembly, and 1 washer. It will require a screwdriver and is rated at "medium" difficulty. You can use this kit to repair a malfunctioning dryer. In order to install this kit, you will need a 1/4 inch nut driver, a lon...Read more

Read less

TIMER, MOTR-60 HZ-USE W/365739 TMR

Part #362681

Knob Assembly, Water Temperature

Part #368769

DISCONTINUED

Part #358168

Common Symptoms of the LAA5800A5

How this model fails, and the parts that fix it.

Videos related to the LAA5800A5

Watch our pros, then fix it yourself.

Replacing the Lid Switch

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Lid closes, switch wouldn't turn on machine.

31 of 47 people found this instruction helpful.

Kenneth from Wilmington, IL
Easy
1- 2 hours
Nutdriver, Screw drivers, Socket set

Used toothpick for a year to push switch acctuator far enough to engage switch. Broke my foot and found time to order part thru PartSelect. Went from cast to boot and received part 2 days after ordered. Had difficulty with foot and getting to switch. Went back into PartSelect and figured out how to dis-assemmble panels thru the diagrams. ... Read more

Read less

Was this helpful?

Washer would fill up, wash, then stop

22 of 31 people found this instruction helpful.

Glen from Plano, TX
A Bit Difficult
30 - 60 mins
Screw drivers

I deduced the lid switch was the problem.

I removed the two screws holding the control panel on. Pulled the control panel back.
Disconnected the ground wire of the lid switch.
removed the two top clamps that hold the panel to the top of the machine.
Pulled back the casing (outside of the washer) and placed ... Read more

Read less

Was this helpful?

One day, I found my dryer continued running after I opened the door. And next day, it stopped working at all. I thought it was time to buy a new one, since my dryer had been used for more than 15 years. But I was curious to know what went wrong, and recalled my friend told me he repaired the door

17 of 21 people found this instruction helpful.

Xiaobin from Cordova, TN
Really Easy
Less than 15 mins
Screw drivers, Wrench set

My daughter found the video on youtube, which showed step by step repairing procedures. I just followed it and fixed my dryer in 15 min.

Was this helpful?