EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

L9875VRV Norge Wall Oven - Instructions

All Instructions for the L9875VRV
106 - 120 of 144

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Light bulb failure
  • Grant from Alexandria, VA
  • Really Easy
  • Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
Oven would overheat
  • MARK from roseville, MN
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Followed directions as supplied. New part did not work, so it must be in the control unit which is no longer available. So time for a new range.
Was this helpful?
Thank you for voting!
Oven have F2 and F3 codes following cleaning cycle making oven inoperable
  • Timothy from Longmeadow, MA
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Remove 2 screws in upper left corner of stove holding sensor in place. Pull sensor out and disconnect plastic electrical connector. Select appropriate adapter (both styles provided with new part) & reinstall. Power up stove and select bake on control unit to test. Works like a charm!
Was this helpful?
Thank you for voting!
Oven would not turn on
  • Stacey from Tampa, FL
  • Easy
  • Less than 15 mins
  • Screw drivers
Watched the video and things went exactly as planned. Love this website will use them again when I need a repair.
Was this helpful?
Thank you for voting!
Fan runs continually ,door locked,error code f2,f3,f7
  • John from Dacula, GA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Turned off breaker,opened door with bent coat hanger by sliding right to left the coat hanger to open the door, remover 2 screws holding in the sensor in upper left corner of the oven. Remove the sensor (gently) with the wire connection from back of oven pulling sensor out a out 8 inches . Disconnect plug. Install new sensor with m atched harness /.connection, installed 2 screws ,turned on breaker.
Was this helpful?
Thank you for voting!
Damaged the oven lamp socket while removing a broken bulb.
  • Ronald from Dover, DE
  • Really Easy
  • Less than 15 mins
Upon receiving the replacement part, I noted that the socket was held in place by simple expanding tabs. TURN OFF POWER TO THE OVEN. Using a right angle pick or similar tool, bend the tabs inward on the existing socket and remove. Disconnect the white, black and green wires. Note which tab is the green tab. Attach the wires to the new soc ket. Push the new socket into place, aligning the key bump on the socket with he slot in the oven wall opening. Install bulb and diffuser.
Was this helpful?
Thank you for voting!
oven temperature was of & then taking along time to heat
  • Barbara from Newark, DE
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Followed video
Was this helpful?
Thank you for voting!
temperature varied in oven.couldn't set
  • tom from winter haven, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed 2 screws in probe and pulled it out.had to take back off as wire was tangled from factory and couldn't do quick repair
Was this helpful?
Thank you for voting!
My oven was not holding temperature.
  • Anthony from Acworth, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I removed the old sensor via the two screws holding it in, unplugged it and replaced it with a new one.
Was this helpful?
Thank you for voting!
Oven would not program and would shut down
  • Sreve from Deland, FL
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
The "PartsSelect" General discription of the parts funtion helped me to confirm my suspitions that there was some form of temperature registering problem. I whatched the short video they provided on how to change the part out, even though, in this case, it's pretty self explanitory.The part was in my hands a day erlier than promised and i n reality, much earlier than I had anticipated from the beginng. It took me all total, 20 minutes to exchange the part out and have the oven in operation again.
Was this helpful?
Thank you for voting!
Bake Element Quit Working
  • Steven from Woodstock, GA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Easy fix, second time repairing the element in the 12+ years we've had the oven. Disconnect power to the oven; unscrew the element from the back wall of the oven. Gently pull the element from the back wall of the oven exposing the slip on connectors. Disconnect old element by gently pulling the connectors apart. Connect new element an d gently push the new element's connector back into the back wall of the oven and tighten down with the screws - that’s it!
Was this helpful?
Thank you for voting!
The oven was not heating up to temperature
  • Max from Bothell, WA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I replaced the oven sensor which was easy to replace. A pigtail wire was provided with the sensor which is intended to be installed first so you don't have to reach around the front and back of the oven at the same time. The replacement was easy. However, that turned out not to be the problem. The real problem was the maytag electroni c clock control timer, temperature control unit. The part number is 7601P177-60. This device has been discontinued and I was fortunate enough to find the part at a local supplier. Once I replaced this, the problem went away. The oven heats up normally. My original symptom was that when setting the oven temperature to something like 350 degrees, the display would rapidly report heating up the oven to that temperature, and the oven was only mildly warm. If you have that symptom, it is probably not the oven sensor. It is the electronic clock unit. Hope you can find one. If you can't, I think you need to by a new oven. Regards
Was this helpful?
Thank you for voting!
Oven randomly turned off and locked
  • Robert from homilton, MT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Replace the oven sensor per the excelent easy video you provided
Was this helpful?
Thank you for voting!
Element burned out
  • Barbara from Sauk City, WI
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Excellent experience with Part Select. Ordered the part on Sunday and received it on Tuesday. Super speedy service and easy installation.
Was this helpful?
Thank you for voting!
Had code F1 and F3 on my oven. Oven wouldn't heat.
  • Cindy from Polson, MT
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Watched the video and it was as easy as described. Not many things go as easily as this.
Was this helpful?
Thank you for voting!
All Instructions for the L9875VRV
106 - 120 of 144