L1630E (1695663) Simplicity Snow Blower - Overview

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

This reversible skid shoe, also known as a skid runner or skid plate, is a genuine manufacturer replacement part. It is a metal shoe, measuring 5 3/4 inches by 3 1/3 inches and is designed for use in snow lowers/snow throwers. The shoe is mounted on either side of the auger housing where it allows you to adjust the height of the auger or ...Read morescraper bar to control the depth of the snow being cleared. The skid shoe can fail due to normal aging as they drag on the ground during operation, impact with hard objects, and improper installation. If the skid shoe is faulty, you will likely notice difficulties with moving through snow, setting the correct depth, and damage to the other equipment components. To replace the faulty skid shoe, first remove the bolts that secure it to the auger housing and then pull it off. Align the new shoe with the mounting holes and reinstall the bolts to hold it in place.

This is an authentic OEM sourced driver belt, not an aftermarket equivalent. It is specially designed for a variety of snow throwers. This is the main drive belt for the unit that will spin the augers. Please make sure to check appropriate diagrams for correct location and application of this item. It is made from durable rubber material ...Read moreand it is sold individually. You would need a set of wrenches to complete this repair.

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is an authentic manufacturer-sourced cotter pin. It is a standard hardware commonly used on a variety of Craftsman lawn and garden equipment. Depending on the model of your unit it will be used in different locations to secure two parts together. Please make sure to check appropriate diagrams for correct application for this part. Th...Read moreis high-quality cotter pin is made of durable metal and is sold individually. It is best to use pliers to remove or install this part.

The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil ...Read moreleaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.

BOLT, 5/16-18 x 3/4" Short Neck Carriage, GR 5

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

This is an authentic OEM sourced component which is specially made for use with Murray and Snapper lawn and garden equipment. The part provides an identical replacement for a missing or a faulty capscrew that was installed on a new unit. It is a standard hardware which may have multiple applications, please make sure to refer to the appro...Read morepriate diagrams of your model for the correct location and application of this screw. Keep in mind this high-quality hex head capscrew is made of durable metal and is sold individually.

The belt goes around the engine pulley. This is an OEM part sourced directly from the manufacturer and used in snowthrowers made by Murray, Snapper, and Simplicity. This item is made of a durable material and is sold individually. A wrench might be necessary during the installation of this part. It will need to be replaced if it breaks or stretches.