L13HPD Husky Compressor - Overview
Models starting with L13HPD
Click on the best match to narrow your results.
Keep searches simple, eg. "belt" or "pump".
Gasket Kit
PartSelect #: PS12099358
Manufacturer #: E100959
This authentic manufacturer-sourced gasket kit is made for use with Craftsman air compressors. The parts in this kit are utilized to ensure a tight fit between the pump's components allowing it to bui...
$26.36
In Stock
CAP, OIL FILL W/O-RING
PartSelect #: PS18715722
Manufacturer #: E100087
Genuine Manufacturer Sourced replacement part designed to fit some Craftsman Air Compressors. This part is made out of Plastic and it is Sold Individually. This part connects to the Crank Case Cover s...
$14.97
In Stock
Valve, Reed
PartSelect #: PS10044655
Manufacturer #: E100229
This replacement valve reed is a n authentic OEM item that is specially designed for Craftsman air compressors. Reed valves are commonly used in high-performance versions of the two-stroke engine, whe...
$18.39
In Stock
Air Compressor Piston Kit
PartSelect #: PS10044663
Manufacturer #: E100251
This piston kit is for air compressors.
The piston kit contains parts for rebuilding the piston and related parts. The kit may include multiple parts; refer to your parts diagram for a complete lis...
$110.33
Special Order
HEAD, CYLINDER
PartSelect #: PS18715728
Manufacturer #: E100227
This cylinder head is a genuine Craftsman replacement part sourced from the original manufacturer for use with air compressors. This part is used to cover the pump assembly and to draw air into the pu...
$47.52
In Stock
Regulator, 3 Port 1/4 Npt
PartSelect #: PS12099359
Manufacturer #: E100971
This is an original Craftsman replacement part manufactured for use with air compressors. The regulator is used to adjust the amount of pressure in the tank. This regulator is sold as an individual replacement part.
$31.20
In Stock
Gauge, Pressure (38mm W/125 Ps
PartSelect #: PS12099375
Manufacturer #: E103339
This is an authentic manufacturer-sourced component is compatible with many compressor machines. The Craftsman pressure gauge is constructed of metal and plastic, and is secured onto the compressor\'s...
$32.57
In Stock
ASSEMBLY, SWITCH, PRESSURE (12
PartSelect #: PS18715734
Manufacturer #: E100957
This is an authentic Craftsman replacement part that is sourced from the original manufacturer for use with air compressors. The switch is used to turn the motor and pump on or off based on the level ...
$94.24
In Stock
Common Symptoms of models starting with L13HPD
[Viewing 2 of 2]
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Compressor runs but not building pressure
Could not find external leak, so assumed problem was in the cylinder head. I removed the big, black plastic shroud, and disconnected the line with the cooling fins leading from the cylinder head to the tank. I then unbolted the 4 Allen bolts holding the cylinder head to the cylinder body. I discovered the gasket that sits on top of the
... Read more
valve plate was shredded in the center piece that separates the intake port from the exhaust port. I put in new reed valves (PS10044654) and replaced the blue gasket between the cylinder and the lower valve plate and the metal gasket between the valve plates and the blue gasket on top of the upper valve plate. The gaskets are part of gasket kit PS10044723. I had to scrape the old blue gaskets off, which was the most time consuming part of the repair. I used valve grease to hold the reed valves in place during re-assembly. I did not use the gasket at the base of the cylinder or the gasket that is used for the crank case cover since neither was removed. Reinstalled the Allen bolts, the line to the tank from the cylinder head and the plastic shroud. Compressor works fine now.
Read less
Parts Used:
-
Andrew from FORT MILL, SC
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Wrench (Adjustable)
12 of 14 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Tank drain valve was unable to close due to rear.
Found the part at Part Select ,simply removed the worn out valve with an adjustable wrench and put new valve in, tightened it and the repair was completed, tested compressor for leaks .SAVED $149.00 by replacing a $7.00 part.
Parts Used:
-
Thomas from UNICOI, TN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench (Adjustable)
2 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!