KXU Range Hood - Overview

The repair did not happen. Parts select sent me the wrong part. They sent a cover plate without any switches.
I;m still waiting for the correct part.!!!!!!!!!!!!!!!!!!!!!!

extremely easy install.

1) Using philips screw driver removed 2 screws
2) pused on the edge of bulb o release it . This is the only tricky part as the bulb normally does not come out easily and there is no clear instructions on how to release it.
3 ) inserted the new bulb and the whole thing was done in less that 10 m ... Read more inutes

Removed and cleaned to overhead grease trap filters which required a sink full of detergent some wire wool pads and and much elbow grease. This is probably a service task that should be performed at least annually for hoods in frequent use. And be careful not to cut your fingers on some of the sharp interior edges.

With the g ... Read more rease filters removed it was then possible to access the switch unit from the inside of the hood. Used a small Phillips screwdriver to loosen and remove the two fastening screws and removed and replaces the whole unit.

Refitting was the reverse of the above process.