KV25G0XSL5 KitchenAid Mixer - Overview

Diagrams for KV25G0XSL5

See every part. Know exactly what you need.

Parts for the KV25G0XSL5

$6.40

Dryer Retaining Ring

★★★★★

(3)

Part #WP9703438

This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. The retaining ring is a genuine OEM part sourced directly from the manufacturer. The ring may vary in appearance due to manufacturer substi...Read more

Read less

$26.82

Worm Following Gear

★★★★★

(64)

Part #W11086780

This gear is used to power your stand mixer. It is attached to the planetary shaft. The gear can become stripped over time or accumulate grease. You may need to replace other mechanical parts at the same time such as the worm gear and pinions. Make sure the mixer is unplugged before beginning this repair. Clear excess grease as you encounter it during this repair.

$63.64

Hub Gear

★★★★★

(30)

Part #W11192795

Includes both the attachment and beveled gear. This worm follower gear is for stand mixers. Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached. Unplug the mixer before installing this part. Wear work gloves to protect your hands.

$54.24

Mixer Worm Gear

★★★★★

(5)

Part #WP9709231

This durable metal worm gear is designed to rotate the planetary assembly in select stand mixers, enabling smooth and consistent operation of attached accessories. As a key internal component, it helps drive the mixing action and ensures reliable performance. If your mixer is unresponsive, making unusual noises, or slipping during use, a ...Read more

Read less

$27.36

Mixer Thumb Screw

★★★★★

(17)

Part #WP9709194

This part is used with the stand mixers attachments, as well as to hold the end cap to the front of the mixer.

$79.64

Stand Mixer Speed Control Board and Knob (Black)

★★★★★

(45)

Part #WP9706648

This speed control switch assembly is a precision electronic component designed to regulate motor speed in stand mixers. It includes a black control knob and is engineered to deliver consistent performance across various mixing tasks, from gentle stirring to high-speed whipping. By allowing fine-tuned adjustments, it helps prevent overmix...Read more

Read less

$8.55

Mixer Retaining Ring

★★★★★

(1)

Part #WP9703680

Used on Stand Mixers.

$8.55

Mixer Retaining Pin

★★★★★

(2)

Part #WP9707223

This part works in conjunction with the worm and bevel gear.

$8.55

Mixer Front Bearing

★★★★★

(4)

Part #WPW10170080

Used in Mixers.

$52.67

Gearcase Housing with Gasket

★★★★★

(21)

Part #8212396

NOTE: This part has been upgraded from plastic to metal housing. Gasket is no longer available separately. ***Used with Stand Mixers.

$13.92

Mixer Thrust Bearing Kit

★★★★★

(3)

Part #WP9703445

This bearing comes equipped with two washers and is used on stand mixers.

$11.77

Mixer Transmission Gasket

Part #WP9709511

Used with stand mixers.

Questions And Answers for KV25G0XSL5

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Harriet - For model number KV25G0XSL5

July 16, 2021

Is there a glass mixing bowl that fits this model?

Hi Harriet, Thank you for your question. For your model, we show that there is only a stainless steel mixing bowl listed for it. The part number listed under your model number for the mixing bowl is PS11757279. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

$79.47

Mixer Bowl

1 person found this instruction helpful.

Was this helpful?

Karen - For model number KV25G0XSL5

February 7, 2025

We are needing a new control board with the control switch - the number on the part isW10814992 REV - can you direct me to the correct part?

Hi Karen, Thank you for your question. The part number for the stand mixer speed control board and knob is PS11746947. We hope this helps!

$79.64

Stand Mixer Speed Control Board and Knob (Black)

1 person found this instruction helpful.

Was this helpful?

Karen - For model number KV25G0XSL5

May 8, 2023

The enamel is chipping off of the paddle of my mixer and I am concerned it is unsafe. Serial NO. WX3860127. I believe there is lead under the enamel. I would like a replacement please. My daughter has the KSM150PSMC Serial No W14533424 and is having the same problem, she would also like a replacement paddle as well.

Hello Karen, thank you for contacting us. According to our research, the flat beater, part number PS11757062, is compatible with your model number KV25G0XSL5. For model number KSM150PSMC, the flat beater, part number PS11757063, is compatible. We hope this helps!

$28.42

Coated Flat Beater

$28.42

Mixer Flat Beater

Was this helpful?

Marilyn - For model number KV25G0XSL5

October 1, 2023

I am looking for the flat beater

Hi Marilyn, thank you for reaching out. The flat beater that fits your model is part number PS11757062. Glad to be of assistance!

$28.42

Coated Flat Beater

Was this helpful?

Common Symptoms of the KV25G0XSL5

How this model fails, and the parts that fix it.

Noisy

Fixed by
these parts

Show All

Touchpad does not respond

Fixed by
these parts

Videos related to models starting with KV25G0XSL5

Watch our pros, then fix it yourself.

Replacing the Dryer Retaining Ring

Replacing the Stand Mixer Speed Control Board and Knob (Black)

Replacing the Bowl Arm Lift

Replacing the Mixer Thumb Screw

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

wouldnt turn beaters

96 of 109 people found this instruction helpful.

Barry from Rowland Heights, CA
Easy
15 - 30 mins
Pliers, Screw drivers

removed metal strap around motor housing then remove the 4 screws holding top motor cover on, then removed the 4 screws that hold gear cover in place, remove long gear that is driven by the motor gear, then with ring pliers remove ring off long drive shaft and lift off worm gears. once all gears are removed --removed all the old grease ( ... Read more

Read less

Was this helpful?

Mixer Made Very Bad Grinding Noise, And Would Skip While Making Bread Dough

79 of 94 people found this instruction helpful.

Dennis from Lake Mills, WI
Really Easy
15 - 30 mins
Screw drivers

1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them ... Read more

Read less

Other Parts Used:

Mixer Rear Bearing

Mixer Front Bearing

Mixer Worm Gear

Worm Following Gear

Was this helpful?

Mixer speed was uncontrollable

43 of 51 people found this instruction helpful.

James from Villa Rica, GA
Easy
15 - 30 mins
Pliers, Screw drivers

Removed screw from back of mixer cover band and then removed the 4 side screws, lifted top off of mixer and removed screws from circuit board control switch, removing wires one at a time so as to install correctly. replaced screws in circuit board/control. Restored top of mixer replaced screws and the put cover band back on mixer.walla do ... Read more

Read less

Was this helpful?