Models > KUID308HPS00

KUID308HPS00 Whirlpool Ice Maker - Overview

Sections of the KUID308HPS00

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
SWITCH – Part Number: W11291138
SWITCH
★★★★★
★★★★★
(15)
PartSelect #: PS12584655
Manufacturer #: W11291138
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light ...
$28.72
  In Stock
Order within the next 12 hrs and your part ships today!
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(2)
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$8.00
  In Stock
Order within the next 12 hrs and your part ships today!
Ice Maker Bin Temperature Sensor – Part Number: WPW10511923
Ice Maker Bin Temperature Sensor
★★★★★
★★★★★
(14)
PartSelect #: PS11755842
Manufacturer #: WPW10511923
This bin temperature sensor is for ice makers. The bin temperature sensor monitors the temperature in the ice maker bin and sends the temperature reading to the electronic control board. Disconn...
$73.57
  In Stock
Order within the next 12 hrs and your part ships today!
Screw – Part Number: WP8281196
Screw
★★★★★
★★★★★
(1)
PartSelect #: PS11745622
Manufacturer #: WP8281196
Sold individually.
$11.09
  In Stock
Order within the next 12 hrs and your part ships today!
Spray Paint - 12 oz. - White – Part Number: 350930
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(2)
PartSelect #: PS347819
Manufacturer #: 350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
$22.62
  In Stock
Order within the next 12 hrs and your part ships today!
Ice Maker Water Distributor Tube – Part Number: W10863947
Ice Maker Water Distributor Tube
★★★★★
★★★★★
(1)
PartSelect #: PS11738017
Manufacturer #: W10863947
The water distributor tube distributes water from the reservoir to the evaporator plate.
$49.65
  In Stock
Order within the next 12 hrs and your part ships today!
Single Hex Head Screw – Part Number: WP489069
Single Hex Head Screw
PartSelect #: PS11742731
Manufacturer #: WP489069
Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".
$5.41
  In Stock
Order within the next 12 hrs and your part ships today!
Screw – Part Number: WP489128
Screw
PartSelect #: PS11742733
Manufacturer #: WP489128
This screw is sold individually.
$13.16
  In Stock
Order within the next 12 hrs and your part ships today!
Touch-Up Paint - Biscuit – Part Number: 4392899
Touch-Up Paint - Biscuit
PartSelect #: PS373131
Manufacturer #: 4392899
$11.68
  In Stock
Order within the next 12 hrs and your part ships today!
MOTOR-COND FAN,115VAC 1090RPM – Part Number: W11613295
MOTOR-COND FAN,115VAC 1090RPM
★★★★★
★★★★★
(5)
PartSelect #: PS16744942
Manufacturer #: W11613295
This is a condenser fan motor for your refrigerator/freezer. This fan motor is most commonly used with frost-free refrigerators with a condenser coil. It controls the rotation of the condenser fan bla...
$124.73
  In Stock
Order within the next 12 hrs and your part ships today!
Screw 8-18 x 5/8 – Part Number: WP3400884
Screw 8-18 x 5/8
PartSelect #: PS11741613
Manufacturer #: WP3400884
Screw size is 8-18 x 5/8". Used with stand-alone ice cube makers.
$5.37
  In Stock
Order within the next 12 hrs and your part ships today!
Water Inlet Valve – Part Number: W10897719
Water Inlet Valve
★★★★★
★★★★★
(1)
PartSelect #: PS11765823
Manufacturer #: W10897719
$144.89
  In Stock
Order within the next 12 hrs and your part ships today!

Questions And Answers for KUID308HPS00

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
May 1, 2023
Ice maker is making too much ice and overfilling the bin. What is the part to replace?
For model number KUID308HPS00
PartSelect logo
Hi Steve, thank you for reaching out. We have researched the model and would suggest making sure the ice maker is leveled and adjusted properly, and the temperature sensor is not blocked or covered by ice. If the issue remains, we would recommend checking the temperature sensor, part number PS11755842, for continuity using a multimeter. We hope this information helps!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the KUID308HPS00

[Viewing 4 of 4]
Light not working
Fixed by
these parts
Fixing
Show All
Fridge too warm
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Show All
Ice maker not making ice
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Door switch module wore out
Pull out old module...
Remove 2 wires...
Tape to inside wall [don't want them to fall down into side panel]..

Order new switch..

Fed Ex pkg came on 2nd day..

Install wires on switch...
Press into opening...
Check door light on..[OK]
.. Done
Parts Used:
SWITCH
  • Fred from Oceanport, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
40 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Parts Used:
Touch-Up Paint - White
  • Michelle from Richardson, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
65 of 136 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice bin overfilling
I'm an hvac/r technician, and regularly work on ice machines. Begin my pulling the white over beneath the control panel. It snaps in place so pull on the bottom then left out. 1/4 nut driver is all you need, and remove the screw holding the bin thermistor clip to the side. Up to the right , beneath the control panel, behind the plastic panel you previously removed is the mollex connector. Unplug the thermistor and follow instructions in reverse to reinstall.
Parts Used:
Ice Maker Bin Temperature Sensor
  • Travis from N CHESTERFLD, VA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!