Quick Question!

Have you ever purchased from PartSelect.com before?

Models > KUIA18PNLS2 > Parts

KUIA18PNLS2 KitchenAid Ice Maker - Parts

All parts for the KitchenAid Ice Maker KUIA18PNLS2

Below is a list of all parts for the KitchenAid Ice Maker KUIA18PNLS2. To find the repair part you need, you can browse the list below or you can narrow your choices by searching for a part by name or description.

All Parts for the KUIA18PNLS2
1-14 of 151
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
$15.94

Ice Machine Cleaner - 16oz

This product is used to clean the inside of your ice machine. It is meant to be used on a freestanding machine, not an ice machine found in your refrigerator. This product may be n...

$137.02

Ice Cutter Grid Complete Assembly

If your freestanding ice maker is not producing ice properly, the ice cutter grid assembly may need replacing. The cutter grid is located within the main unit of the ice maker, and contains thin, heated wires that slice the ice into cubes that are then deposited in the ice bin. If the cutter grid is broken, ice can back up within the ice maker. This part is sold as a complete assembly and is used with freestanding ice makers. Be sure to wear work gloves to protect your hands when completing this repair. This is an OEM part that sources directly from the manufacturer.

$15.59

Switch, Plunger Grid/Light

The purpose of the light switch in your refrigerator is to automatically turn on the light when the door is opened. If the light does not come on automatically when you open the do...

$21.01

TUBE-WATER

$91.23

Condenser Fan Motor

NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.

$33.58

Ice Cutting Grid Wire

There is approximately 10' of wire. Note: 2 kits are needed to replace both directions.

$17.50

Drain Fastener Cap

This is a drain fastener cap and is used in conjunction with your freezer/refrigerator. This model is almost 1.5 inches in diameter, half an inch thick, and is white in color. This...

$211.19

Circulation Pump with Motor

The circulation pump assembly, used in a free-standing ice maker, delivers water from the water tank over the top of the evaporator plate. It does this to form the ice that drops onto the cutting grid. The first step in installing this part is to remove the chute, ice scoop bracket, water pan, and head cap screw that holds the plastic cover over the pump. Refer to the manufacturer-approved installation instructions for further guidance and accuracy. Make sure to disconnect and unplug the ice maker from the power source before installing the circulation pump. Remember to wear gloves to protect your hands.

$5.10

Screw, 8/18 x 3/8

This screw is sold individually.

$32.86

Tube, Plastic

Used with stand alone ice cube makers.

$5.44

Compression Nut

The compression nut is used as a connection between the water supply line and other components in your refrigerator such as your ice maker and your water dispenser. Tools required ...

$4.37

Screw

Sold individually.

$2.96

Screw

Sold individually.

$13.67

SCOOP

All Parts for the KUIA18PNLS2
1-14 of 151