My Orders
KUDT KitchenAid Dishwasher - Overview
Models starting with KUDT
Click on the best match to narrow your results.
- KUDT03FTBL0 KitchenAid Dishwasher
- KUDT03FTBL1 KitchenAid Dishwasher
- KUDT03FTBL2 KitchenAid Dishwasher
- KUDT03FTBL3 KitchenAid Dishwasher
- KUDT03FTPA0 KitchenAid Dishwasher
- KUDT03FTPA1 KitchenAid Dishwasher
- KUDT03FTPA2 KitchenAid Dishwasher
- KUDT03FTPA3 KitchenAid Dishwasher
- KUDT03FTSS0 KitchenAid Dishwasher
- KUDT03FTSS1 KitchenAid Dishwasher
- KUDT03FTSS2 KitchenAid Dishwasher
- KUDT03FTSS3 KitchenAid Dishwasher
- KUDT03FTWH0 KitchenAid Dishwasher
- KUDT03FTWH1 KitchenAid Dishwasher
- KUDT03FTWH2 KitchenAid Dishwasher
- KUDT03FTWH3 KitchenAid Dishwasher
- KUDT03STBL0 KitchenAid Dishwasher
- KUDT03STBL1 KitchenAid Dishwasher
- KUDT03STBL2 KitchenAid Dishwasher
- KUDT03STBL3 KitchenAid Dishwasher
- KUDT03STSS0 KitchenAid Dishwasher
- KUDT03STSS1 KitchenAid Dishwasher
- KUDT03STSS2 KitchenAid Dishwasher
- KUDT03STSS3 KitchenAid Dishwasher
- KUDT03STWH0 KitchenAid Dishwasher
- KUDT03STWH1 KitchenAid Dishwasher
- KUDT03STWH2 KitchenAid Dishwasher
- KUDT03STWH3 KitchenAid Dishwasher
- KUDT23HY3 KitchenAid Dishwasher (DISHWASHER)
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$29.47
In Stock
Door Balance Link Kit
Part #8194001
This part is a door balance link kit, also sometimes known as door cable or door spring cable kit, that helps support the door as it opens and closes by connecting to the dishwasher door hinges. The kit includes two door balance links and two door balance mounts with wheels, which will replace both the left and right sides. The only tool ...Read moreneeded is a 5/16 nut driver. Before removing the existing kit, take note of how the door balance link kit is assembled for a smooth replacement process. It is recommended to check the door springs in case they need to be replaced as well.
Read less
No Longer Available
$7.47
In Stock
$15.00
In Stock
Dishwasher Mounting Bracket
Part #WP8269145
The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read moreat the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.
Read less
$9.62
In Stock
Dishwasher Tine Pivot
Part #WPW10082853
The tine pivot clip, also known as the tine row pivot, is used in dishwashers and is located in the upper dishrack. At around 3 inches in length, the clip is used to keep the tine row in place in the dishrack. If your clip is cracked or damaged, it is best to replace this part. To repair, first lift the release tab and hold the other side...Read more to prevent it from falling off. After lifting it off, you can set the new clip on the tine row and lock it up. Refer to the manual provided by the manufacturer for further installation instructions and guidance. Remember to wear work gloves as a safety precaution. This repair was rated as very easy by our customers and should be done in 15 minutes or less.
Read less
$54.24
In Stock
Dishwasher Silverware Basket
Part #WP8531233
This silverware basket holds utensils in your dishwasher. If it becomes damaged or goes missing, you can replace it with this part. No disassembly is required to replace this part; simply remove the existing basket and replace it with the new one. To keep the basket in good shape, place silverware carefully inside, and be careful when removing and replacing the basket when unloading utensils.
$78.33
In Stock
Dishwasher Silverware Basket Gray
Part #WPW10190415
The silverware basket is a holder for washing flatware or silverware in your dishwasher. Note: This part has been updated by the manufacturer, it may appear different but will still function the same. This basket is gray in color. To do this repair, open the dishwasher door and slide the bottom rack out. The new basket hooks onto the back...Read more rail of the dish rack. Tip: to prolong the life of your basket, keep the sharp end of your cutlery pointed up to prevent cutting through the bottom, and gently place them instead of dropping.
Read less
No Longer Available
Rubber Water Delivery Tube
Part #4171544
This rubber tube carries water from the upper spray arm manifold to the receiver of a dishwasher. This thin walled tube can become brittle over time and crack. If it does, it will lead to poor cleaning quality of the dishes on the upper rack, and you will need to replace it.
$34.74
In Stock
Chopper Assembly
Part #W10083957
This is a chopper assembly or drain food chopper, and it is designed for your dishwasher. The chopper chops up/minces the food particles in your dishwasher to prevent them from clogging the pump. You may need to replace this part if your dishes are not being cleaned properly, your appliance is particularly noisy, or you are noticing drain...Read moreing problems. The tools you will need to make this repair include a number 20 and a number 15 torque screwdriver, a small flat blade screwdriver, and a pair of needle nose pliers.
Read less
$54.24
In Stock
Dishwasher Water Inlet Valve
Part #WPW10158389
This dishwasher water inlet valve is a single-coil solenoid component responsible for regulating the flow of water into the appliance. It ensures the correct amount of water is delivered during each cycle, supporting optimal cleaning performance and preventing issues such as underfilling, overfilling, or leaks. By electronically opening a...Read morend closing based on the cycle’s requirements, the valve helps maintain proper water pressure and temperature balance. Replacing a faulty valve can resolve symptoms like the dishwasher not filling, leaking, or failing to clean effectively. This component is engineered for durability and consistent operation.
Read less
$32.63
In Stock
Bi-Metal Fuse
Part #W10258275
This part is used as a safety device to protect the dishwasher circuit from overload. If the temperature gets to high it will shut off the electrical current to the heating unit in the appliance. Also known as Thermal Fuse.
$62.60
In Stock
Dishwasher Drain Pump
Part #WPW10348269
This drain pump is used in dishwashers to remove water from the dishwasher tub. If the impeller in the dishwasher is damaged or the motor has been shorted out and will not drain, it is possible the body is cracked, causing leakage. To prevent this from happening, replace the drain pump. The tools needed for this installation are: Phillips...Read more screwdriver, 5/16 inch nut driver, 5/8 inch wrench, and a flathead screwdriver. Remember to unplug your dishwasher from the power source before beginning this installation project. Refer to the manual provided by the manufacturer for further installation instructions.
Read less
Common Symptoms of models starting with KUDT
How this model fails, and the parts that fix it.
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Will not drain
Fixed by
these parts
these parts
Show All
Watch our pros, then fix it yourself.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
roller axels were broken and wheels missing
474 of 475 people
found this instruction helpful.
pulled out the old broken axels and pushen in the new ones and then snapped in the wheels.
Other Parts Used:
Was this helpful?
Thank you for voting!