KT715-3041 Kohler Engine - Overview

This is a high-quality manufacturer-sourced part which is made for use with Kohler engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the valve stem. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper applicatio...Read moren please refer to the appropriate diagrams of your model. This high-quality part is made of durable rubber material and is sold individually. You will need a screwdriver and a wrench set to take the engine apart and perform the repair.

This stator kit (15 amp) is an OEM part direct from Kohler. Composed of metal, wiring and protective plastic, the kit is made for use with many small engines. This component provides the necessary voltage for charging the motor battery. A wrench and a pair of pliers are helpful for making the installation. Please refer to the manual for additional repair instructions.

This is an original replacement part manufactured for use with Kohler small engines. The flanged hex nut is typically used as a fastener on the governor control assembly. This nut can have multiple uses, please see model diagram for part location and usage. The flanged nut is available as an individual replacement part.

This item is an authentic Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The gasket is used to seal the connection between the cylinder and the cylinder head. This item also includes the exhaust gasket, but is priced as a single part.

This is an original replacement part manufactured for use with Kohler small engines. The air filter element traps dust and debris to prevent contamination of intake air. Replacing air filters is part of normal engine maintenance, please note the air filter is sold individually.

This part is an OEM from Kohler. The exhaust valve (std.) is composed of high-quality metal, and is compatible with many small engines. This part is fitted into the cylinder head assembly. The charged fuel moves through the exhaust valve to the manifold. This item is sold individually. A wrench is often needed in making the repair.

This is an identical replacement for a damaged or a missing square key that was installed on a new unit. It is commonly utilized to secure components on a shaft. Keep in mind this high-quality part is made of durable metal and is sold individually. This authentic square pin is supplied by the original equipment manufacturer for use with K...Read moreohler engines that are commonly installed on a variety of lawn and garden equipment. Pliers might be needed to secure or remove it.

This flywheel assembly helps regulate engine speed and maintain smooth rotational balance. Designed for durability, it supports stable engine operation and consistent performance.

This authentic manufacturer-sourced replacement part is specially produced for use with Kohler engines commonly installed on Toro lawn and garden equipment. The starter motor provides an initial motion, engage the flywheel to start the engine. Please note this high-quality component is sold individually.

This item is available as an individual replacement part. The screw attaches to the ignition module and is made of metal. If this item becomes stripped or broken it will need to be replaced and may require a wrench during the installation. This is an OEM part sourced directly from the manufacturer and used in engines made by Kohler and Toro.

This is an authentic Kohler replacement part that has been sourced from the original manufacturer to be used with small engines. The foam filter fits over the main air cleaner and is used to prevent dust and debris from damaging the air cleaner. This item can be cleaned but is recommended to replace periodically. This item is available as an individual replacement part.