KSRC25FVMS00 KitchenAid Refrigerator Parts & Repair Help | PartSelect
You are logged in as a customer LOG OUT
Models > KSRC25FVMS00

KSRC25FVMS00 KitchenAid Refrigerator - Overview

Manuals & Care Guides for KSRC25FVMS00

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(72)
PartSelect #:PS11722128
Manufacturer #:EDR3RXD1
The function of the Refrigerator Water Filter is to filter the water supply to reduce and remove contaminants in your water supply for a certain period of time. The filter is meant...
$68.91
In Stock
(60)
PartSelect #:PS884734
Manufacturer #:8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these repla...
$7.32
In Stock
(82)
PartSelect #:PS11739042
Manufacturer #:WP2182179
The lower door closing cam is used in refrigerator doors, it can be located on the fresh food side or the freezer side. It helps hold the door open. This cam is made out of plastic...
$8.85
In Stock
(47)
PartSelect #:PS11752991
Manufacturer #:WPW10329686
The Door Cam is a black plastic part which helps the door pivot shut while keeping the door and hinge in proper alignment. Lubricating this part upon installation may help it move ...
$10.44
In Stock
(60)
PartSelect #:PS3497634
Manufacturer #:W10408179
The water inlet valve (Refrigerator Water Inlet Valve Kit) provides water for the ice maker and water dispenser. This part is located at the back of the refrigerator, and connects ...
$86.91
In Stock
(74)
PartSelect #:PS869316
Manufacturer #:2198597
This Ice Maker (Icemaker Assembly, Complete Icemaker Assembly, Ice Maker Assembly, Refrigerator Ice Maker) can be used with 25-27 cubic feet refrigerators that have a vertical auge...
$174.88
On Order
(55)
PartSelect #:PS11739026
Manufacturer #:WP2180224
This is a refrigerator ice guide that is made entirely of clear plastic. This ice guide is located in the freezer door. Turn your refrigerator ice dispenser off before replacing th...
$19.92
In Stock
(34)
PartSelect #:PS11723180
Manufacturer #:W10823377
In this kit you will find the support, the ice door, spring, and delay. The heater ribbon is no longer needed and therefore will not be included with this part. This kit works in t...
$71.07
In Stock
(22)
PartSelect #:PS11750673
Manufacturer #:WPW10225581
If you have ice building up in your freezer, or if your freezer is getting too warm during the defrost cycle you may need to replace the bi-metal defrost thermostat. The function o...
$37.47
In Stock
(12)
PartSelect #:PS10064583
Manufacturer #:W10757851
These boards tells the icemaker when it's full and that it has to dump the ice, and it also tells the icemaker when to refill with water.
$264.22
In Stock
Questions and Answers for KSRC25FVMS00
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

there were directions

  • Customer: Kate from Jacksonville, FL
  • Difficulty: Very Difficult
  • Time to Complete: 30 - 60 mins
  • Tools Required:
  • 739 of 1237 people found this instruction helpful
We didn't know where the product went and it was very difficult to install. read more

Ice maker stopped functioning

  • Customer: Phil from Auberry, CA
  • Difficulty: A Bit Difficult
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 448 of 472 people found this instruction helpful
Remove the icemaker service door... gently pry the door pins from the hinge sockets. Remove the 3 screws from the under side of the icemaker with a nut driver (1/4"). Gently remove the icemaker . It's a tight fit between the top of the compartment and the icemaker lower support tray. Next, disconnect the electrical connector at the right side. You're do... read more

Refigerator door was not closing all the way if not pushed shut.

  • Customer: Norbert from Sugar Land, TX
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Pliers, Screw drivers
  • 367 of 386 people found this instruction helpful
Remove the top hinge cover. Removed the top hinge support. Lifted the door from the bottom support. Old door cams were worn completly flat. Replaced the lower door cam and closing cam use a little vasalene for lubricant on the cam surfaces. Placed the door back on the lower hinge support. Replaced the top hinge support. Door is closing great now. read more