EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KSEB Range - Instructions

All Instructions for the KSEB
91 - 105 of 111

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Both outside door handles turned very beige
23 of 76 people found this instruction helpful.
  • Howard from Boynton Beach, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
Was this helpful?
Thank you for voting!
Damaged Socket When Removing Bulb Base
  • Charles from Oceanside, CA
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
This is a built-in oven, so the biggest problem was figuring out how to remove it from the cabinet. The solution turned out to be removing the cooktop above it and unscrewing two screws that connected the oven to the inside of the cabinet. The other problem was removing BOTH metal backs from the oven. The first one was easy. The secon d one wasn't. The old socket was recessed behind the second back, making it virtually impossible to access the metal "wings" that hold it in place, so I ended up pulling out the socket assembly from inside the oven with pliers.
Was this helpful?
Thank you for voting!
I had a power serge and it burned the Plug at the termial block and melted a few wire.
  • Robin from Vanderbilt, PA
  • Really Easy
  • 15 - 30 mins
  • Socket set
After we got the part in the mail my husband put it on and shortened the wires and put new plugs on the ends of the wires and we had to get a new plug put it on and it was fixed.
Was this helpful?
Thank you for voting!
stove top got hot when using large pans
  • Albert from Bryant, SD
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Removed the existing element and replaced it with the new one.
Was this helpful?
Thank you for voting!
Burned out stove top burner
  • Gene from Turtle Lake, ND
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Easy change! Two screws in front and grounding strap screw-lifted out and turned stove top upside down on table. three more screws for burner element and then reinstall with first two screws and grounding strap screw.
Was this helpful?
Thank you for voting!
An Insect got in between the element coil & shorted it out
  • Howard from Land O' Lakes, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
unplugged the range, removed the cooktop left & right front screws, unplugged left & right plug & unscrewed ground wire. Parts arrived fast & reassembled. . Happy, Happy, Happy! Happy Wife...Happy Life!
Was this helpful?
Thank you for voting!
Light bulb failure
  • Grant from Alexandria, VA
  • Really Easy
  • Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!
All Instructions for the KSEB
91 - 105 of 111