KSDG950ESS3 KitchenAid Range - Instructions
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
elements were worn and not heating properly
Repair was very easy for anyone to do,Just lift the old element cartridge up and pull out,And insert new the one! Very simple it took less than two minutes.The New element cartridge(stainless steel) Fits perfectly and functions perfectly.Ordered parts on a Saturday and they arrived Monday! impressive!!
Parts Used:
-
Michael from Cincinnati, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I wanted a second 8" canning element for home canning
I purchased an 8" canning element for my new Kenmore Stove. The ordering process was easy. I printed my order out. I did not receive a confirmation by email, however I received the part in a timely manner. I was satisfied with the process.
Parts Used:
-
Shelley from Powell, WY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
5 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old cartridge burner plate connectors had failed
Simply bought a new cartridge, pulled the old one out and put in the new one. The best thing was that I used another cartridge bottom to replace the bad connectors on the still shiny top and then had two good looking cartridge tops.
Parts Used:
-
John Davenport from Upper Black Eddy, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My stove is a 1985 model and the coils did not heat evenly any more.
When I called to inquire if a new cartrige would fit in my 1985 model range the gentleman walked me through unplugging the old cartrige to see how it connected. I did this while on the phone with him and I then explained the connection; he told me that a new cartrige would just plug into the same place....and it did!
You had a great person at your service desk.
Thank you
You had a great person at your service desk.
Thank you
Parts Used:
-
Linda from Toledo, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
none
-
Albert from Annapolis, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our coil elements were looking worn.
We took out the old element cartridges, and plugged in the new cartridges. It was easy, and made our cook top look fantastic!
Parts Used:
-
Harriet from Coppell, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
coil element not working
-
Johnny from Trinity, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burned out-burners did not work
the new element came, I unplugged the old one and plugged the new one in. 5mins max
Parts Used:
-
JohnPaul from Ft. Bragg, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
A cartridge (set of 2 electric burners) which I bought 6 months ago had a short.
1 phone call to PartSelect and I found out they warranty their parts for 1 year. They shipped a new one immediately.
Great service!
Great service!
Parts Used:
-
Marilyn from Bloomfield Hills, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Needed to replace Jenn-Air Coil Element
-
Ruth from New Hope, MN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
27 year-old heating cartridges worn out!
Called Parts Select - Susan (that talked with me) very helpful - got my purchase shipped that afternoon so I could start to cook again!! Received cartridges two days later! Thanks Parts Select!
Removed old cartridtges and plugged in the new - in time for dinner!
Removed old cartridtges and plugged in the new - in time for dinner!
Parts Used:
-
Nancy from Ilion, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
23 Year Old Cooktop. Both Cartridges Were In Very Poor Condition . Two Of The Cooking Elements Did Not Work.
The repair consisted of opening the package and placing the new cartridge into position. Looks good and works like new. Delivery was within two days. Thanks.
Parts Used:
-
bob from holt, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old cartridge functioned poorly
ordered new cartridge slid it into place, it is great, easy to obtain and install, what a fabulous service PartSelect provides. Thank you!
Parts Used:
-
Vencine from east setauket, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cook top is not working
-
bintu from brinkley, AR
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cook top just wore out
was a simple unplug the old and plug in the new
nothing to it.
best thing is wife was happy .........for a little while anyway
nothing to it.
best thing is wife was happy .........for a little while anyway
Parts Used:
-
TIMOTHY from STURGIS, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!