My Orders
- Home
- KSDB900ESS2
- Instructions
KSDB900ESS2 Whirlpool Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I had a power serge and it burned the Plug at the termial block and melted a few wire.
-
Robin from Vanderbilt, PA
- Really Easy
- 15 - 30 mins
-
Socket set
After we got the part in the mail my husband put it on and shortened the wires and put new plugs on the ends of the wires and we had to get a new plug put it on and it was fixed.
Was this helpful?
Thank you for voting!
stove top got hot when using large pans
-
Albert from Bryant, SD
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed the existing element and replaced it with the new one.
Was this helpful?
Thank you for voting!
Damaged Socket When Removing Bulb Base
-
Charles from Oceanside, CA
- A Bit Difficult
- 30 - 60 mins
-
Pliers, Screw drivers
This is a built-in oven, so the biggest problem was figuring out how to remove it from the cabinet. The solution turned out to be removing the cooktop above it and unscrewing two screws that connected the oven to the inside of the cabinet. The other problem was removing BOTH metal backs from the oven. The first one was easy. The secon
... Read more
d one wasn't. The old socket was recessed behind the second back, making it virtually impossible to access the metal "wings" that hold it in place, so I ended up pulling out the socket assembly from inside the oven with pliers.
Read less
Was this helpful?
Thank you for voting!
Light bulb failure
-
Grant from Alexandria, VA
- Really Easy
- Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!