My Orders
KSB3AC0 KitchenAid Blender - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
After sitting on my kitchen counter for nearly 42 years the rubber feet left foot prints.
14 of 16 people
found this instruction helpful.
-
Susan from Gig Harbour, WA
- Really Easy
- Less than 15 mins
We:
tipped the mixer over on its side
pulled the old feet off
put the new feet in place and pounded them w/our fists
set it back up on its new feet
smiled
tipped the mixer over on its side
pulled the old feet off
put the new feet in place and pounded them w/our fists
set it back up on its new feet
smiled
Was this helpful?
Thank you for voting!
The 5 feet on my Kitchen Aide, had worn out
8 of 9 people
found this instruction helpful.
-
Beverly from Post Falls, ID
- Easy
- Less than 15 mins
-
Screw drivers
Took the old feet (5) off and put new on the Kitchen Aide, looks great. Stands high and your assistance on the phone, was so appreciated.
Was this helpful?
Thank you for voting!
Missing pedestal foot
4 of 4 people
found this instruction helpful.
-
Michael from CARLISLE, PA
- Really Easy
- Less than 15 mins
Turned the mixer on its side and slid the part into the bottom of the base.
Was this helpful?
Thank you for voting!
Old seal was worn and stained.
4 of 8 people
found this instruction helpful.
-
Claudia from Banning, CA
- Really Easy
- Less than 15 mins
Removed old seal; tucked new seal into place. Took seconds. What impressed me was how easy it was to order and how quickly it arrived. PartSelect.com is now my "go to" for future parts needs.
Was this helpful?
Thank you for voting!
missing lid seal
2 of 5 people
found this instruction helpful.
-
GREGORY from FRISCO, TX
- Really Easy
- Less than 15 mins
We ordered a seal for the lid of our KitxhenAid Blender .
It was shipped in one day and we got it the next day.
Perfect service!
It was shipped in one day and we got it the next day.
Perfect service!
Was this helpful?
Thank you for voting!
Lost a rubber foot on my Kitchen Aid mixer. The remaining feet we're hard and mushroomed. I decided to replace all 5. That was the correct decision.
-
Dale from Manheim, PA
- Really Easy
- Less than 15 mins
-
Pliers
I griped each foot with a pliers and twisted it out of its setting. I then set a new foot in place and hammered it into place with a small hammer. The feet fit snugly and did not need to be glued. Job was easy and mixer sits like new. I was glad I spent the money to replace all of the feet at once.
Was this helpful?
Thank you for voting!
seal failure - it broke
-
edward from eau claire, WI
- Really Easy
- Less than 15 mins
First I removed the new seal from its packaging. Then I placed it on the interior lid perimeter, carefully tucking the outer seal edge under the restraining tabs. It was a perfect fit. To celebrate, I made margaritas.
Was this helpful?
Thank you for voting!