KRFC302EBS08 KitchenAid Refrigerator - Overview

This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this p...Read moreart is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.

Sold individually.

The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair includ...Read moree a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.

This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely through the dispensing system when the filter is not present. The bypass can fail if it becomes clogged, cracked, or falls out of alignment. A fa...Read moreulty filter bypass will result in leaking, poor ice production, and difficulties dispensing water. You can find the filter bypass inside the refrigerator, near the water filter housing. Disconnect the water supply lines and remove the faulty bypass. Insert the new bypass in its place and reconnect the water supply lines.

This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer only. Make sure you need the left side end cap before you order this part. This part is made of white plastic, and will fit into position on th...Read moree left side of the pantry drawer. This part is approximately 20 inches wide and 7 inches tall. It is an OEM part sourced directly from the manufacturer.

This part is the replacement for the end cap on your refrigerator pantry drawer. Your pantry drawer will have two end caps; one for the right side and one for the left. This is the end cap for the right-hand side, and is sold separately from the left end cap. The part is made of white plastic and is an OEM part sourced directly from the m...Read moreanufacturer. To remove the old pantry drawer end cap, simply remove the pantry drawer and disconnect the end cap. Replace it with a new one, and slide the pantry drawer back into place.

This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light is not working properly. In order to make this repair you will need a Phillips screwdriver, a pair of needle nose pliers, and a small flat b...Read morelade screwdriver. This light switch is almost 2 inches long, 1.5 inches wide, and just over an inch thick.

This kickplate grille is attached to the bottom of the refrigerator.

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part...Read more. Please be sure to disconnect the power to your refrigerator before starting your repair.

This pantry drawer cover is a genuine replacement component designed to serve as both the lid and front panel for the pantry drawer in select refrigerator models. Constructed from a combination of white and clear plastic, it features a tapered center handle for smooth drawer operation and improved grip. The cover helps regulate internal t...Read moreemperature, preserving the freshness of stored items by minimizing exposure to fluctuating conditions. Engineered for compatibility with models from Whirlpool, KitchenAid, Maytag, Amana, and other associated brands, this OEM part ensures a precise fit and long-term durability. Installation is straightforward and requires no specialized tools. Always verify model compatibility before purchase.

This refrigerator door gasket is designed to create a secure, airtight seal around the fresh food compartment, helping to maintain consistent internal temperatures and prevent energy loss. Constructed with a flexible PVC outer layer and an embedded magnetic strip, it ensures a snug fit that minimizes cold air leakage and warm air infiltra...Read moretion. Measuring approximately 42 inches wide by 17.5 inches long, this gray gasket is compatible with a wide range of refrigerator models from Whirlpool, KitchenAid, Kenmore, Maytag, and other affiliated brands. Replacing a worn or compressed gasket can significantly improve sealing performance, reduce frost buildup, and enhance overall energy efficiency. For best results, confirm compatibility with your appliance model before installation.

This part is the replacement water filter cover for your refrigerator. The cover protects the water filter to prevent damage. If the water filter cover is cracked or missing, you should replace it. It is made of white plastic and is approximately 12 inches long, 5 inches wide at one end, and 4 inches wide at the other. To replace the wate...Read morer filter cover, simply depress the locking tabs and remove the old cover, then snap the new cover into place. This part is sold individually.