KRB3 Kawasaki Leaf Blower / Vacuum - Overview

The Fuel Tank Grommet is a 1-inch, black, rubber part. It attaches to the fuel tank so you can run your fuel lines through it, and is rated as "Easy" to install by most of our customers. If worn or damaged, it will begin to leak fuel, and must be replaced. Refer to your make, model and diagrams to ensure you're choosing the right part.

The fuel filter clamp, is a silver, individually sold, metal part, used to secure the fuel line to the fuel filter. It attaches to the fuel filter and if broken, typically due to fatigue or damage, it should replaced. Installation is rated as "Easy" and requires Pliers and a Screwdriver. When removing the fuel line to remove the old clamp...Read more, make sure you have a bucket to catch the fuel. Refer to your make, model, and diagram to ensure you're choosing the right part.

This Fuel Line (3x5x182) is a 7.25-inch-long rubber part which is installed inside the fuel tank to the carburetor. It runs from inside of the fuel tank and attaches to the fuel filter inside of the tank. The other end attaches to the carburetor. If damaged, the carburetor will not get enough fuel, and the part must be replaced. Installi...Read moreng this part is rated as "Easy" and can be done with pliers and a screwdriver. Refer to your make, model and diagrams to ensure you're choosing the right part.

The return fuel line is used to transfer fuel from the carburetor, back to the fuel tank. This fuel tube is designed for use with trimmers and is made of high-quality polymer and measures approximately 3.5-inches (90cm) in length, .12-inches in inner-diameter (3mm) and .24-inches in outer-diameter (6mm). This tube does not come with any s...Read moreecuring hardware and is sold as an individual part. Although this tube is known for its strength to most chemicals like gasoline, prolonged exposure to UV rays, extreme cold or hot temperatures and certain fuel additives can cause this tube to degrade quicker. If you notice a reduction in flexibility and clarity of the material, and general brittleness to the tube, replace it immediately. Prolonged use of a fuel line that needs replacing can cause issues such as fuel leaks and engine performance issues resulting from poor fuel flow or contaminated fuel. To replace this tube for your trimmer, drain the fuel from your trimmer before simply removing it from the carburetor and grommet, and any securing hardware. You may require a push tool to install the new tube, and that should be done with the appropriate hardware to secure it to the carburetor and fuel tank grommet.

The Breather allows air to enter the tank, so no vacuum is created as the fuel level drops, which would prevent the flow of fuel to the carburetor.It seals in the gas emissions and fuel at the same time. It is a metal and rubber part, sold individually, rated as "Easy" to install. If damaged, fuel may start leaking from it, and it must be...Read more replaced. The part is attached inside of the fuel cap. Refer to your make, model and diagrams to ensure you're choosing the right part.

The Fuel Tank Cap and Breather is an assembly made up of black plastic parts. You'll know if you need a new one if fuel is leaking, and this appears to be the source. This can happen due to normal wear, fatigue, and damage. This kit is rated as "Easy" to install and attaches to the fuel tank. Refer to your make, model and diagrams to ensure you're choosing the right part.

This 2-cycle in-tank fuel filter is a component in your lawn equipment that ensures clean fuel reaches the engine by filtering out impurities and debris. It is made of durable metal and high-quality felt and is typically located in the fuel lines. A clogged or cracked filter can cause engine sputtering and idling issues, leading to fuel f...Read morelow problems and potential engine damage. Additionally, impurities in the fuel can damage the engine. To install a new filter, first turn your machine off and allow the engine to cool. Use pliers or a wrench to disconnect the fuel lines. Slide out the old fuel filter, taking care to remove any mounting brackets or holders if necessary. This authentic OEM filter is sold individually.

It is made of a felt material and is sold individually. The air filter element fits between the cap and the baffle. A screwdriver might be necessary during the installation of this part. This item may become dirty over time and will need to be replaced. This is an OEM from Kawasaki for use in engines, edgers, and trimmers.

This is a genuine OEM sourced replacement recoil starter which is commonly used on Kawasaki lawn and garden equipment. It is the component which allows a user to easily pull-start the unit. It is a complete assembly which includes a plastic housing, starter pulley, starter spring, and the pull rope with a grip, please note the hardware to secure the assembly is sold separately.

This is a genuine OEM supplied replacement part that is designed for use with Kawasaki lawn and garden equipment. It is utilized to keep the fuel in the tank. It includes a retainer that remains in the tank to keep the fuel cap from being lost or falling on the ground. One durable plastic fuel cap is included per order.

A recoil spring, also known as a recoil starter spring, is a tightly wound spring that is designed to be pulled and used within startup mechanisms of various models of outdoor power equipment, such as trimmers, edgers and leaf blowers. The spring is one part of a whole system, including a pulley and spool which is what a user will pull, b...Read moreefore the recoil spring retracts it. This recoil spring is compatible with various makes and types of power equipment, and is sold as an individual OEM part, without any other hardware. This spring measures approximately 3/4-inch when wound and is made of high-quality metal. If you notice that your starter mechanism is not retracting properly, or does not have enough tension on it, the spring may be worn out or broken, which can happen over time and through normal wear and tear. Depending on your equipment, the replacement process will look different for this spring, so reference your user manual for the exact location.

This is a high-quality OEM sourced replacement part which is specially designed for use with Kawasaki handheld lawn and garden equipment. By pressing on the pump-priming bulb, it will force fuel into the line from the tank into the carburetor. Once the carburetor is full of fuel, the excess will be purged back into the tank, over time the...Read more primer will lose its elasticity or crack eventually requiring a replacement. Please note this part is made of durable rubber material and is sold individually.