This part is a retaining ring, sometimes called a retaining clip, that holds the drum support roller onto the shaft of a dryer. It is made entirely of metal and measures less than an inch in diameter. The retaining ring is a genuine OEM part sourced directly from the manufacturer. The ring may vary in appearance due to manufacturer substi...Read moretution, but the function is the same. You may need to replace this part if the dryer is noisy during tumbling, will not tumble, or takes too long to dry. Be sure to check drum support roller kit and shaft before ordering parts.
This gear is used to power your stand mixer. It is attached to the planetary shaft. The gear can become stripped over time or accumulate grease. You may need to replace other mechanical parts at the same time such as the worm gear and pinions. Make sure the mixer is unplugged before beginning this repair. Clear excess grease as you encounter it during this repair.
Includes both the attachment and beveled gear. This worm follower gear is for stand mixers.
Worm follower gear meshes with the worm gear, causing the rotation of the planetary assembly where the accessories attached.
Unplug the mixer before installing this part. Wear work gloves to protect your hands.
This durable metal worm gear is designed to rotate the planetary assembly in select stand mixers, enabling smooth and consistent operation of attached accessories. As a key internal component, it helps drive the mixing action and ensures reliable performance. If your mixer is unresponsive, making unusual noises, or slipping during use, a ...Read moreworn or damaged gear may be the cause. Replacing this part can restore proper function and extend the life of your appliance.
This speed control switch assembly is a precision electronic component designed to regulate motor speed in stand mixers. It includes a black control knob and is engineered to deliver consistent performance across various mixing tasks, from gentle stirring to high-speed whipping. By allowing fine-tuned adjustments, it helps prevent overmix...Read moreing and ensures optimal texture and consistency in recipes. This genuine OEM part is compatible with select KitchenAid and Whirlpool stand mixer models and is ideal for replacing a worn or malfunctioning speed control unit. Installation should be performed with the appliance unplugged to ensure safety and proper handling of electrical components.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill - For model number KP26M1XWH5
December 2, 2019
My mother has owned this 6 quart kitchen aid mixer and she dropped it on the floor. After helping her to pick it up off the floor she plugged it in and now the speed control does not work. All it will do is 2 positions "off or full power" and i would like to get it fixed to pass it along to her granddaughter who used it with her grandmother. Any information would be useful. Thanks , v/r bill emhoff
Hello Bill and thanks for writing.
You can replace the speed control assembly part # PS11746948. This way the granddaughter should still get a lot of use out of this unit. We hope this helps. Please contact us anytime.
looking for attachments for this model - dough hook, beater and whip. stainless steel is preferred.
Thank you!
Hello Dawn, The Dough Hook PS16875730 is made of metal and has a burnished finish. The Wire Whip PS11746914 also has a burnished finish. The Flat Beater The Flat Beater PS16875729 is made from metal and has a burnished finish. We look forward to hearing from you.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Plastic gear housing in stand mixer fractured causing gears to crash
70 of 107 peoplefound this instruction helpful.
WES from BREVARD, NC
Really Easy
15 - 30 mins
Pliers, Screw drivers
Removed four screws to remove main cover. Removed four more screws to remove fractured plastic gear housing cover. Removed retainer ring and slid two gears and dowel off main shaft. Lifted out remaining gear train and bearings, Removed all grease and metal chips from all components. Greased new gears and reassembled. Replaced plasti
... Read morec gear housing cover with oreviously purchased die cast replacement part. Assembled main cover.
removed metal strap around motor housing then remove the 4 screws holding top motor cover on, then removed the 4 screws that hold gear cover in place, remove long gear that is driven by the motor gear, then with ring pliers remove ring off long drive shaft and lift off worm gears. once all gears are removed --removed all the old grease (
... Read moredo this to get all the metal shavings out from the failed gear) repace the grease in the gear housing and reassemble in reverse order
Read less
Was this helpful?
Thank you for voting!
Mixer Made Very Bad Grinding Noise, And Would Skip While Making Bread Dough
79 of 94 peoplefound this instruction helpful.
Dennis from Lake Mills, WI
Really Easy
15 - 30 mins
Screw drivers
1, Removed trim piece (1 screw) 2, removed cover (4 screws) 3, removed speed switch assembly (2 screws) 4, removed gear cover (4 screws) 5, removed and examined 2 worm gears for wear. Gear cover was badly cracked, don"t know if it was caused by a previous repair or by heat, as old cover is plastic. Received new parts and installed them
... Read more, 2 bearings, 2 worm gears, 1 new cover of diecast metal and a new gasket. All repairs made with a #2 phillips screw driver. My wife then made bread, and it preformed flawlessly.
My Orders
