My Orders
KIRD861VSS0 KitchenAid Range Hood - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
On / Off switch broken
2 of 3 people
found this instruction helpful.
The retractable range ventilator stopped working in the up positiion. Removed grease filter. Removed existing CONTRL-MTR. Disconnected 2 flat control cables and connected them to new CONTRL-MTR and installed the new CONTRL-MTR. Also replaced the push button switch. Replaced grease filter. In testing the unit the ventilater would retra
... Read more
ct but not come back up unless I lifted the top trim piece with the push button switch in it and stuck a tooth pick in the hole to activate the switch. The down rod of the new pushbutton switch was too short. I then noticed the old push button switch had a very thin hard plastic tube extending the down rod. I transfered the tube to the new switch and it worked OK.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!