KHWS01PMT2 KitchenAid Washer Parts & Repair Help | PartSelect
Models > KHWS01PMT2

Manuals & Care Guides for KHWS01PMT2

Click to download
Search for parts
Keep searches simple, eg. "belt" or "pump". Need help?
(24)
PartSelect #:PS11744957
Manufacturer #:WP8182119
This part is also called the Door Boot Seal. It's the main seal between the front bulkhead and the outer tub. Clamps are not included. NOTE: Must order clamps separately, if neede
$136.30
On Order
(14)
PartSelect #:PS11745016
Manufacturer #:WP8182634
This part is used on front load washers and includes the interlock switch assembly.
$86.92
In Stock
(26)
PartSelect #:PS1485610
Manufacturer #:280187
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. This part is used on front load models.
$163.33
In Stock
(1)
PartSelect #:PS11746840
Manufacturer #:WP90767
This screw is sold individually.
$5.83
In Stock
(18)
PartSelect #:PS11744913
Manufacturer #:WP8181694
Used with some front load washers. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
$72.80
In Stock
PartSelect #:PS11745030
Manufacturer #:WP8182703
Shock absorbers help keep the washer from vigorous shaking during its cycles. Sold individually.
$38.58
In Stock
(1)
PartSelect #:PS11742721
Manufacturer #:WP488729
Metallic screw that is less than an inch long. Does not include the plastic washer.
$5.14
In Stock
(5)
PartSelect #:PS11744910
Manufacturer #:WP8181651
Attaches to door lock mechanism.
$8.05
In Stock
(4)
PartSelect #:PS11744959
Manufacturer #:WP8182210
Used to help hold your bellow in place on your washer.
$20.37
In Stock
(1)
PartSelect #:PS11740613
Manufacturer #:WP285655
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washe...
$5.93
In Stock
Questions and Answers for KHWS01PMT2
Be the first to ask our experts a question about this model!
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

Bellows were moldy, needed to replace

Washer Door Bellow – Part Number: WP8182119
  • Customer: Franck from Annandale, VA
  • Difficulty: Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required:
  • 341 of 363 people found this instruction helpful
The first step is to remove the retainer ring that holds the outside of the bellow in place.
To do this, Open the washer door as far as you can to get it out of the way. look underneath of the front of the bellow on the outside of the washer where it meets the door. Put your head almost on the floor and look up.
You will find a spring streached... read more

Washer would not drain ,F02 and SUD code displaying

Drain Pump Kit – Part Number: 280187
  • Customer: Donald from Wichita, KS
  • Difficulty: A Bit Difficult
  • Time to Complete: 1- 2 hours
  • Tools Required: Pliers, Socket set
  • 218 of 224 people found this instruction helpful
(1) First I unpluged the washer then I removed the water from the tube with a water vac.(2) Then I removed the three (3) screws that holds the front panel, using a Torx T-20 socket. ( this is a front load washer ). The panel is below the loading door.
(3) I packed towels under the washer.
(4) I slowly removed the cleanout in the front of the p... read more

front load washer latch replacement

Door Lock Latch – Part Number: WP8182634
  • Customer: James from Vilonia, AR
  • Difficulty: A Bit Difficult
  • Time to Complete: Less than 15 mins
  • Tools Required: Nutdriver, Screw drivers
  • 184 of 213 people found this instruction helpful
1. remove the three screws from the top backside of the top panel
2. push the top panel to the rear 1/8 to 1/4 inch
3. lift/rotate top panel from rear to front, set aside.
4. remove the three wire connectors from latch.
5. use #15 Torx to remove the three screws from the latch.
6. remove and replace part using top opening.
7. r... read more