KGSA KitchenAid Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
after self cleaning door locked and control panal went of
-
Sunny from New York, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
After describing my problem read the review from other people with a same problem. I can't believe it was so easy not mention how much money I saved. It was the thermostat just needed a screw driver to open about dozen screws from the back panel there it was it was thermostat my 12 years old son just unscrew the two screw and pull tthe pi
... Read more
n from both side replaced it with a new one and turn the electric on and there it was every thing is back to normal. My son now has the bragging writes for doing this.
Read less
Was this helpful?
Thank you for voting!
Oven Drawer Roller Snapped Off
-
Kimberly from Sandusky, OH
- Really Easy
- Less than 15 mins
-
Screw drivers
Replaced both rollers....Quick and Easy!!
Was this helpful?
Thank you for voting!
replaced burner grate
-
JOHN from TOMS RIVER, NJ
- Really Easy
- Less than 15 mins
BEST service ever Ordered Fri. received Sat. afternoon.Less than 24 hr.
Was this helpful?
Thank you for voting!
Wheel broke off oven drawer
-
Matthew from Plainview, NY
- Really Easy
- Less than 15 mins
I got the new wheel and screwed it in by hand. It took like 4 minutes total between taking out the drawer, screwing the new wheel on, and putting the drawer back in
Was this helpful?
Thank you for voting!
Missing oven racks
-
Deb from Eastvale, CA
- Really Easy
- Less than 15 mins
We have double wall ovens and each one only had a single oven rack in it. After 3+ years, I was tired of dealing with the issue so I ordered two new racks from PartSelect. They came quickly and fit perfectly. All I had to do was open the box, remove the rack and slide it into the oven. No muss, no fuss. Why didn't I do this years ago
... Read more
??
Read less
Was this helpful?
Thank you for voting!
Remove racks before self-cleaning
-
Michael from Waxhaw, NC
- Really Easy
- Less than 15 mins
Similar to another customer, the racks were not removed before self-cleaning. The issue was that I AM THE HUSBAND and I admit that I did it. Ooops. Great price and if I do it again, I will go back to parts select to get a replacement.
Was this helpful?
Thank you for voting!
not needed
-
Peggie from Gresham, OR
- Really Easy
- Less than 15 mins
screwed in the new oven light
Was this helpful?
Thank you for voting!
key pad off button to oven not operating
-
Rafael from Salinas, CA
- Really Easy
- 15 - 30 mins
-
Screw drivers
With great knowledgeable information from your employee i even found my model #!took off knobs and all lower screws to get to key pad simple plug and play install!Tested all before i put back together! perfect very happy customer THANK YOU VERY MUCH!
Was this helpful?
Thank you for voting!
Oven / Broiler Gas Burners Won't Light
-
Howard D from Shasta Lake, CA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
This site made the job so easy. Looked at a couple of other posts tested the coil in the gas valve (it was open) ordered new valve from PartSelect only took a couple of days to arrive R&R the valve, turned on the oven and it fired right up no problem. THANKS PartSelect your site is great. By the way. I compared prices Sears $151.00 and 5
... Read more
days shipping. Repair Clinic $142.52 and 5-6 days shipping. Local supply shops my area about $150.00 but not in stock would have to order. PartSelect price with faster shipping $139.04 You guys rock!!!
Read less
Was this helpful?
Thank you for voting!
During the self cleaning, the panel board lights went off and the oven door locked.
-
Sherrie from Teaneck, NJ
- Really Easy
- 15 - 30 mins
-
Screw drivers
We unplugged the range and shut off the cable switch. We took off the back panels and found the thermostat behind the bottom panel. I believe my husband had to take the top panel off first in order to get the bottom panel off. We pulled out the two wires that were connected to the thermostat and then took out the thermostat by un
... Read more
screwing two screws. We installed the new thermostat (two screws) for our model range, re-connected the two wires, plugged it back into the wall and switched on the cable. We were elated when the panel board lid up and seconds later the oven door opened. It works beautifully. Thank you, thank you, Thank you PartSelect and to everyone that wrote their installation instructions that inspired me to try it. It was very easy and we saved hundreds of dollars.
Read less
Was this helpful?
Thank you for voting!