EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KGRT607 KitchenAid Range - Instructions

All Instructions for the KGRT607
91 - 105 of 193

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
hinge on oven door broken
3 of 7 people found this instruction helpful.
  • charles from batimore, MD
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
I have KitchenAid convection oven that is about ten years old . The hinge on the left hand side broke so I had to replace it. It took me about 2 hours to get the job done because I cleaned the door as I went . The change out while fairly strait forward did take some time . A lot longer the some of the people said .
Was this helpful?
Thank you for voting!
Replacing oven light and socket
1 person found this instruction helpful.
  • Carol from BELLINGHAM, WA
  • A Bit Difficult
  • 1- 2 hours
  • Pliers, Screw drivers, Wrench (Adjustable)
The old part, including lightbulb and socket, had corroded into place, and the glass light cover was stuck to the socket. I used a dead blow hammer and a dowel just under the diameter of the hole to tap on the back side of the socket to loosen it and get it out. The metal tabs on the old socket were folded back to make it fit better (?), which made it harder to remove. Lots of muscling of the part to get it out. Easy to install new part once old one was out of the way. An experienced person would have removed the old part and installed the new in no time.
Was this helpful?
Thank you for voting!
Broken door inner glass
1 person found this instruction helpful.
  • Louis from RIVERHEAD, NY
  • A Bit Difficult
  • More than 2 hours
  • Screw drivers
Video's did not show my door construction so I had some difficulty and surprises. One must disassemble and keep all parts in order of disaasembly with all screws for each part.separated. Be methodical and patient and it will all work out.
Was this helpful?
Thank you for voting!
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 people found this instruction helpful.
  • Frank from Palm Coast, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Was this helpful?
Thank you for voting!
Light would not light
1 of 2 people found this instruction helpful.
  • Frank from LEBANON, VA
  • Easy
  • 15 - 30 mins
  • Pliers
Pop old one out and new one in
Was this helpful?
Thank you for voting!
wire came loose and shorted out
1 of 2 people found this instruction helpful.
  • Elizabeth from HOUSTON, TX
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Ordering the part online was easy. It arrived in a timely manner. I found a terrific video online showing how to install the terminal. It was so easy. Thank you for the great instructional video.
Was this helpful?
Thank you for voting!
cleaner
2 of 5 people found this instruction helpful.
  • Mary from Duarte, CA
  • Really Easy
  • Less than 15 mins
just needed clearner for the top of my glass top, the operator was very helpful I received my clearniner in 7 days thank you
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people found this instruction helpful.
  • RAYMOND from JACKSONVILLE, FL
  • Really Easy
  • Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Oven never heated hot enough to bake or roast!!
1 of 2 people found this instruction helpful.
  • Kathleen from Chicago, IL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
My son had first removed the 2 screws to disconnect the damaged element. He then removed the element
by pulling it out and disconnected the wires.

I was si grateful when he was able to connect the new igniter so we could have cookies for Christmas...thank you for your very prompt delivery of the element and the ease to r econnect it.
Was this helpful?
Thank you for voting!
burned oven bulb
3 of 9 people found this instruction helpful.
  • Ivanka from Atlantra, GA
  • Really Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
The hardest part was taking out original light bulb because screws on shield where hard to unscrew after all this years . The old bulb vent out leaving neck in socket. It took narrow electrical pliers to get neck out .The generic appliance bulb did not fit and had aluminum neck ,not recommended for brass sockets in ovens.Putting new ligh t bulb in was not the problem.
Was this helpful?
Thank you for voting!
oven light not working
2 of 6 people found this instruction helpful.
  • Richard from Gaylord, MI
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
replaced light socket but did not repair problem. must have burned the motherboard.


pleased with service from your company.
Was this helpful?
Thank you for voting!
2- Burners would not spark to light
1 of 3 people found this instruction helpful.
  • Lyle from annandale, NJ
  • Easy
  • 15 - 30 mins
  • Screw drivers
Received the New Spark Harness with in 2 days after ordering from Parts - Select !!! And had intstalled in 15 minutes
Was this helpful?
Thank you for voting!
broken inside glass
0 of 1 people found this instruction helpful.
  • mike from orland park, IL
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
After reading what other people did for this job I figured I could do this. The inside glass broke after liquid accidently hit the glass from basting.
Just followed the digram from the internet to show how the door and glass comes apart. The only thing I had to figure out was how to take the door off. And once I figured that out it went pretty easy.
The door comes off just by lifting up on the door and pulling out. Just make sure you put all your parts in order on how they come apart and just replace them them in that order.
Was this helpful?
Thank you for voting!
Block broke
1 of 4 people found this instruction helpful.
  • Edward from Crimora, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
Was this helpful?
Thank you for voting!
Inside Light would not work
2 of 7 people found this instruction helpful.
  • Dan from Caddo Mills, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Turned off CB for the oven,Remove the oven from the cabinet , remove the back of the oven, replaced the light Assembly. turned on CB for the oven, tested the light. and truned off the CB and replace the back and reinstalled the oven in the cabinet.
Was this helpful?
Thank you for voting!
All Instructions for the KGRT607
91 - 105 of 193