This oven rack is chrome in color and is approximately 24.76 inches wide by 15.78 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined this repair to be very easy. You will not require any tools to complete it. To replace the oven rack, simply pull the old rack out, and rep...Read morelace it with the new one. Make sure to put the new rack back in the oven with the beveled edge in first. To keep your oven racks clean, we recommend that you pull them out before using the self-cleaning function on your oven.
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.
The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty temperature sensor. A faulty temperature sensor can be a fire risk. If your sensor is not working properly, you should look to replace it straigh...Read moret away. A failed oven sensor is most often responsible for F3 or F4 error messages on electronically-controlled ovens. Make sure you disconnect the power to your range before you start your repair.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
This part is a light bulb that is 120-130 volts and 15 watts, and is used in conjunction with your range or wall oven. The function of this bulb is to illuminate the interior of the oven.Before making this repair, you will need to disconnect your appliance from the electrical source. We recommend wearing work gloves to protect your hands ...Read moreduring this installation. No tools will be required for you to make this repair. However, if your old bulb breaks while you are trying to remove it, you will need a pair of pliers to grasp the socket and twist it until it comes out.
This part is the replacement door gasket for your oven. It is now made of black rubber and is sold individually. The door gasket runs along the circumference of the oven door and creates a seal that insulates the oven and keeps heat in. If your oven will not heat up properly, or if you notice that the door gasket has become loose or worn,...Read more it may need to be replaced. To replace the door gasket, you will need to remove the retaining bracket at the bottom of the oven door, then carefully pull the gasket away from the front of the oven cavity. Then, push the new gasket inside the groove on the outside of the oven cavity, securing it with the arrowhead fasteners that are built in to the oven cavity. This is an OEM part from the manufacturer.
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a pr...Read moreotective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jim - For model number KGRA806PSS02
February 17, 2020
The brass nozzle for the top burner in the oven is a m54. Should that be changed to a different one when converting to propane? What nozzle would it be if i had to?
Hello and thank you for writing.
The orifices need to be changed when converting to propane, so does the regulator. The conversion kit for your unit is PS974549. We hope this helps. Please contact us anytime if you require further assistance.
My oven will not shut off when the off button is pressed. There is no beep when it is pressed. Thanks
Hello and thank you for writing.
If the oven continues to heat after it is turned off, the control board PS11747372 is likely defective. If the control board is defective, replace it. Sometimes. If the bake burner electrode PS11747275 has failed, the oven will not turn off. You also need to check the gas valve assembly PS11747403. We hope this helps. Please contact us anytime if you require further assistance.
My daughter picked up this stove used, how do i know if it's set up for natural gas or propane?
Hello and thank you for writing.
The serial tag and rating plate contain the gas type information, either natural gas (NG) or liquid propane (LP). If a gas product is converted to the other type of gas, a sticker is placed near the original serial tag and rating plate to indicate the gas type change. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Robert - For model number KGRA806PSS02
November 4, 2021
The oven light will not turn off. Light stays on all the time.
Hello Robert, Thank you for the question. This could indicate the door is not closing properly or the switch in the Door Lock is defective and the Lock may need to be replaced. We hope this helps!
Where can I get the specs and features of my Kitchen Aid Gas Stove with model # KGRA806PSS02??
Hello Marco, thank you for contacting us. According to our research, your model has a 600-15000 BTU triplet burner, 12500 BTU power burner for quick cooking, and two 6000 BTU simmer burners. The capacity of the oven is 3.6 cubic feet. It has a self-cleaning feature. It has a sabbath mode which makes it possible to use the range without having to turn it on. The dimensions of your model are approximately:
Height: 43 7/8 inches.
Width: 30 inches.
Depth: 27 inches.
We hope this information helps!
Was this helpful?
Thank you for voting!
Prev
1
2
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
When using self cleaning, oven door wouldn't open and screen panel went blank.
91 of 98 peoplefound this instruction helpful.
Abdurehman from Lawrenceville, GA
Really Easy
15 - 30 mins
Screw drivers
I searched similar problems on the web and learned that a whole lot of people have Kitchenaid stove with the same problem. They all stated that the thermostat burns when self cleaning. Since technician wanted $190.00, I decided to change it myself. The part cost me $40.00. To instal the thermostat, I removed the panel at the back of
... Read morethe stove and the thermostat is attached with two wires. After I replaced the thrmostat, the screen panel came on and I was able to open the door. I am posting this to tell people that anyone can do this.
Read less
Was this helpful?
Thank you for voting!
function key stuck
40 of 52 peoplefound this instruction helpful.
Jeffrey from Vicksburg, MS
Really Easy
15 - 30 mins
Screw drivers
The repair was easy, I used one screw driver and that was it, less than an hour. Part worked great! Before I repaired the oven, I was told by a service tech. the repairs would cost $693, I repaired myself for $166 tnru part select . Using a Philips head driver I unscrewed two screws holding the front panel onto the stove, unplugged
... Read morethe control panel. Unscrewed the mother board pulled old membrane switch out replaced it with new. Its that easy. Then reverse the process.
Read less
Was this helpful?
Thank you for voting!
During the cleaning cycle, oven died and door locked
31 of 36 peoplefound this instruction helpful.
Randy from Bellevue, WA
Really Easy
15 - 30 mins
Screw drivers
Apparently this is a common problem (defect) with KitchenAid ovens of various models. I am not a repairman, but replacing the thermostat was very simple. I pulled the stove out and removed the large back panel of the oven. The was right there in the open, impossible to miss. It looked identical the the replacement thermostat. There a
... Read morere only 2 screws and 2 wires to push on and it's fixed. Anybody can replace this part easy. I hope the replacement part is better than the original!
My Orders
