This bottle of non-abrasive cooktop cleaner breaks down and gets rid of the hardest baked-on stains and residue without causing any harm to your appliance. The bottle is 10 oz and does not require a large amount of product to do the job. This cleaner is perfectly safe to use on any glass, ceramic, stainless steel, chrome, or porcelain coo...Read morektop surface. The cleaner is creamy in texture and provides a protective coat of silicone on smooth surfaces. To apply, use a gentle scrub, sponge, or rag and gently press in a circular motion until the stains are removed.
This palnut is designed for use in cooktops, ranges, wall ovens, dehumidifiers, and range hoods. The palnut is screwed onto a bolt on top of an ordinary nut, and locks the nut in place when the nut is tightened. This product is made of metal, and is approximately 1/2-inch in diameter. This product is sold individually. This is an OEM part...Read more sourced directly from the manufacturer. Be sure to disconnect power to the appliance before you begin this repair.
This pressure regulator is three inches long. It is made of metal, but has a blue plastic plug on each end. This regulator sits below a gas range's control panel.
This is a 4-point re-ignition spark module. NOTE: This part has been redesigned by the manufacture, it may appear different but will still function the same.
Enhance the performance of your range with Whirlpool's Right Front Surface Burner Head. This authentic Whirlpool OEM part has been expertly designed for select models of Whirlpool's leading home appliances, including specific models of Maytag, KitchenAid, and others. Its primary function is to evenly distribute gas through its holes or sl...Read moreots, ensuring a consistent flame across the cooking area. Prior to installation, ensure you switch off the gas supply and unplug the range for maximum safety. Please also remember to wear work gloves to protect your hands during the process. We strongly recommend confirming the compatibility with your range model before ordering.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Burners kept clicking after ignited
32 of 36 peoplefound this instruction helpful.
Robert from Ranchos de Taos, NM
Really Easy
15 - 30 mins
Screw drivers
This problem was driving me crazy for months. Of course, after I bought and installed the part and it still was not fixed I finally found a website that told me how to fix the clicking. The problem is that the removable head burners (#8 on the top assembly diagram) are not making good electrical contact with the base burners (#22). What I
... Read more did was grab the head burners and grind them back and forth into the base burners with the weight on the heal of my hand. Steel wool or sandpaper would work too--you just want to clean the surfaces to restore electrical contact. If you still want to know how to replace the spark module start by removing #24. This will allow the removal of #9 (after you take the knobs off). You may have to do some fiddling cause the rubber gasket is sticky. Next there are 2 obvious regular screws for #14 and 2 not so obvious star screws in the space where the burner valves are. After #14 is off there are 2 screws on the spark module to be removed and one that you can't loosen that is in a slot. You wriggle the module out of that one.
Read less
Was this helpful?
Thank you for voting!
Baked on sauce
12 of 16 peoplefound this instruction helpful.
Julie from Newnan, GA
A Bit Difficult
More than 2 hours
Used cooktop creme, oven cleaner and Mr. Clean sponges. After many days of working on the surface, we were able to remove 99% of the sauce.
Was this helpful?
Thank you for voting!
Too Small
7 of 7 peoplefound this instruction helpful.
Christine from JOHNSTOWN, CO
Very Difficult
Less than 15 mins
Your website says these are the replacement rubber tips for the grates on the range. They arrive and they are too small and fall out. I spoke to the "chat" on your website. I am informed they do not sell the rubber tips separately. You have to purchase a new set of grates for $294. Ridiculous. Why sells rubber tips for grates that d
... Read moreon't fit the existing grates. I wasted $24 in purchasing the grates which included $9.99 shipping and $5.40 shipping to return the item.