See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sparker would not quit sparking after lighting the gas.
37 of 48 peoplefound this instruction helpful.
John from Waterford, MI
A Bit Difficult
30 - 60 mins
Nutdriver, Wrench (Adjustable)
Turned off the gas then disconnected the gas line. Unplugged the AC cord and removed the unit from the counter top. Had to locate a suitable area to lay the cooktop, rather large. The bottom cover is held on by 6-8 sheet metal screws, however, the gas regulator and nipple must be removed also for the cover to come off. I removed the Ignit
... Read moreer module screws, leaving the wires connected and mounted the new module in it's place. I then removed one wire at a time from the old and put it on the new part. Replaced the back cover and reinstalled the gas regulator with fresh pipe sealant. Probably took an hour including cleaning the top and counter top.
Read less
Was this helpful?
Thank you for voting!
broken burner control knobs
7 of 8 peoplefound this instruction helpful.
Linda from Morris, CT
Really Easy
Less than 15 mins
the knobs where hard to find around my area. i went to several appliance repair stores and they were unable to locate the knobs. so, i went online, your site made finding them easy because i was able to restrict my search to exactly what i needed. they shipped quickly, we are very pleased.
Was this helpful?
Thank you for voting!
Control Knob stem broke
10 of 20 peoplefound this instruction helpful.
Marla from Roseland, NJ
Really Easy
Less than 15 mins
Removed broken control knob - and replaced with new one