This surface burner knob is used in ranges and ovens. The knob allows you to control and adjust the temperature of the surface burner on your range. Note that this knob accepts a D-shaped shaft. If your knob does not turn properly, gets stuck, or is too loose, changing this part can solve your problem. No tools are needed for this easy re...Read moreplacement. Make sure to unplug your range from the power source before installing. Refer to the manual provided by the manufacturer for further guidance.
This double burner grate is a manufacturer-approved replacement part for your gas range. It is matte black in color, and comes with 5 protector pads. This repair is rated as easy by our customers. Make sure the surface of the range is cool before replacing the grate.
Introduce functionality and sleek aesthetics to your kitchen with this Burner Cap by Whirlpool. Cast in a coal matte black, it promises a sophisticated look while ensuring your cooktop operates at its peak. This authentic OEM part is expertly designed to fit specific models of Whirlpool appliances for a smooth replacement. Conveniently po...Read moresitioned, it shields the burner head from food spills while ensuring a consistent spread of flame for even heating. Installation is a breeze, but remember - safety first! Always ensure your cooktop is cool before setting this part. Choose this Whirlpool Burner cap for a kitchen that is functional, safe, and stylish.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
the knob was melted by a hot pan
21 of 25 peoplefound this instruction helpful.
David from Corinth, TX
Really Easy
Less than 15 mins
popped off the old knobs and put on the new ones in less than a minute
Was this helpful?
Thank you for voting!
Top burners would not light. No "clicking" .
24 of 36 peoplefound this instruction helpful.
Carolyn from Bellingham, MA
Easy
15 - 30 mins
Screw drivers
My husband and I replaced the igniter module, following directions we found online. We removed the old one, replaced it with the new one, and thankfully everything is working great!
Was this helpful?
Thank you for voting!
Igniter problem on one gas burner
16 of 20 peoplefound this instruction helpful.
Roland from Houston, TX
Really Easy
Less than 15 mins
Screw drivers
I had to remove the two separate components of the gas burner unit, each had two screws. I lifted then tilted the lower portion of the burner unit to allow access to the underside of the igniter. I removed the wire and then with an offset screwdriver I removed the single screw that held the igniter in place. I reversed the steps to inst
... Read moreall the replacement, very quick fix.
I was also very pleased with how quickly the order was processed and the part was delivered, only three or four days with standard shipping.