EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KGCG KitchenAid - Overview

Models starting with KGCG

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Surface Burner Knob – Part Number: WP3181304
$23.60
In Stock
Surface Burner Knob
★★★★★
★★★★★
(5)
Part #WP3181304
Sold individually. This knob accepts a D-shaped shaft.
Surface Burner Knob – Part Number: WP3181305
$24.67
In Stock
Knob Skirt - Black – Part Number: W10854242
$9.62
In Stock
Knob Skirt - Black
★★★★★
★★★★★
(6)
Part #W10854242
The knob skirt or grommet on your range goes around the knob, forming a buffer between it and the range surface. If your knob skirt is damaged, you should consider replacing it. This product is approximately 2 inches in diameter. This part is made of black plastic, and is sold individually. Many of our customers have described this repair as very easy. To complete the repair, simply remove the burner knob and the old knob skirt, replace it with the new knob skirt and re-attach the burner knob. The product contains four locking tabs that should snap into place easily.
Range Knob Skirt – Part Number: WP3180081
$9.62
Special Order
Range Knob Skirt
★★★★★
★★★★★
(5)
Part #WP3180081
This white knob skirt is located between the glass top and the control knobs of your stove top. The skirt has an outside diameter of approximately 2 inches. The most common reasons to replace the timer knob skirt is if it is cracked or damaged, or if the timer assembly will not advance. This repair is a relatively simple one, but be careful not to snap the plastic clips when you are inserting the new knob skirt into place. This genuine OEM replacement knob skirt is sold individually.
Surface Burner Knob – Part Number: WP3181306
$29.47
In Stock
Surface Burner Knob
Part #WP3181306
This almond burner knob accepts a D shape shaft. Sold individually.
Range Surface Igniter Electrode – Part Number: 4175453
$225.30
Special Order
Range Surface Igniter Electrode
Part #4175453
Sold Individually.
Knob Skirt - Black – Part Number: W10854241
$13.92
In Stock
Knob Skirt - Black
★★★★★
★★★★★
(3)
Part #W10854241
NOTE: No longer available in biscuit or white. Black only.
Burner Gasket – Part Number: 4166263
No Longer Available
Burner Gasket
Part #4166263
Spark Ignition Switch – Part Number: WP3185427
$58.42
Special Order
Spark Ignition Switch
Part #WP3185427
When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.
Spark Module – Part Number: WP4454392
$174.69
Special Order
Spark Module
Part #WP4454392
This spark module uses a high voltage spark discharge to the switch to ingnite the gas.
Surface Burner Knob - Black/Chrome – Part Number: 4169279
No Longer Available
Surface Burner Knob - Black/Chrome
Part #4169279
Sold Individually. This knob accepts a D-shaped shaft.
Range Screw – Part Number: WP313808
$7.47
In Stock
Range Screw
★★★★★
★★★★★
(1)
Part #WP313808
Sold individually.

Common Symptoms of models starting with KGCG

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sparker would not quit sparking after lighting the gas.
37 of 48 people found this instruction helpful.
  • John from Waterford, MI
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Wrench (Adjustable)
Turned off the gas then disconnected the gas line. Unplugged the AC cord and removed the unit from the counter top. Had to locate a suitable area to lay the cooktop, rather large. The bottom cover is held on by 6-8 sheet metal screws, however, the gas regulator and nipple must be removed also for the cover to come off. I removed the Ignit er module screws, leaving the wires connected and mounted the new module in it's place. I then removed one wire at a time from the old and put it on the new part. Replaced the back cover and reinstalled the gas regulator with fresh pipe sealant. Probably took an hour including cleaning the top and counter top.
Was this helpful?
Thank you for voting!
Porcelain sleeve broke
16 of 18 people found this instruction helpful.
  • David from Bishop, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Due to the age of the appliance, the screws were almost fused to the burner. I used a spray lubricant and broke the screws free with an impact screw driver. It was pretty easy with this type of driver. This avoided stripping the screws which would have occurred with a regular screw driver. The installation was easy and it all works li ke a charm!
Was this helpful?
Thank you for voting!
Broken Knob
11 of 12 people found this instruction helpful.
  • Tyrone from Stephens City, VA
  • Really Easy
  • Less than 15 mins
Old knob was shattered, so there was no removal. Opened package and pushed the knob on. Turned to test.
Was this helpful?
Thank you for voting!