Models
>
KGCG260SAL3
KGCG260SAL3 KitchenAid Cooktop - Overview
Sections of the KGCG260SAL3
[Viewing 5 of 5]Manuals & Care Guides for KGCG260SAL3
Click to downloadKeep searches simple, eg. "belt" or "pump".
Surface Burner Igniter Electrode with Wire
PartSelect #: PS356929
Manufacturer #: 4175453
Sold Individually.
$253.21
In Stock
Surface Burner Knob - Black/Chrome
PartSelect #: PS355927
Manufacturer #: 4169279
Sold Individually. This knob accepts a D-shaped shaft.
No Longer Available
Burner Grate
PartSelect #: PS337567
Manufacturer #: 3179106
Sold Individually. This is the grate that sits over the burner for your pots and pans to rest on while cooking.
No Longer Available
Gas Valve/Switch Seal Cover
PartSelect #: PS11740880
Manufacturer #: WP3188425
Part is located on top of the igniter switch that's next to the gas valve. Helps regulate gas flow and the amount of normal leakage that may occur.
$35.28
In Stock
Spark Module
PartSelect #: PS338692
Manufacturer #: 3186576
This part sends enough current to the igniter to create a spark to the bottom of the burner cap.
No Longer Available
Switch Kit
PartSelect #: PS389222
Manufacturer #: 814404
This switch is used for both surface burners and grills.
No Longer Available
Questions And Answers for KGCG260SAL3
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Symptoms of the KGCG260SAL3
[Viewing 1 of 1]Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Porcelain sleeve broke
Due to the age of the appliance, the screws were almost fused to the burner. I used a spray lubricant and broke the screws free with an impact screw driver. It was pretty easy with this type of driver. This avoided stripping the screws which would have occurred with a regular screw driver. The installation was easy and it all works li
... Read more
ke a charm!
Read less
Parts Used:
-
David from Bishop, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
15 of 17 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the grate broke in pieces
There was no repair to do. All I had to do was toss the broken grate and place the other one on top of the burner. I was very impressed with how easily it was to find the new grate on this site, and how quickly my part came. I had a huge party in 3 days and without having to pay for expedited shipping, it was at my doorstep in 2 days. Awe
... Read more
some service!
Read less
Parts Used:
-
kathryn from palo alto, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing sheared off screw
The rangetop was about 20 years old and one of the igniter attaching screws sheared off as I tried to unscrew it. I had to drill out the screw body stuck in the burner and retap the hole with a 4-40 tap. The other screw, I used penetrating oil on and it came out using an impact screwdriver. One must take off all the range top knobs, burn
... Read more
er grates and drip ringsthen. Then use a philips screwdriver to remove both of the wire covers (grate supports) to get at the wire holes and igniter coil on the right. Next, tape the new wire (about 4 inches overlap) to the old wire and pull the new wire through as you're pulling the old wire out from under the rangetop passage - from left side to right side. The rest is easy. attach the right side of the new wire to the same igniter coil terminal as the old wire and put the covers back on, keeping the left side of the wire handy near the burner it came off of. Put the burners back in, attach the wires, lower the top and put the drip rings, grates and knobs back and test. Done.
Read less
Parts Used:
-
Roy B from Union City, CA
-
Difficulty Level:Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
Was this instruction helpful to you?
Thank you for voting!