My Orders
- Home
- KGCC566RBL00
- Instructions
KGCC566RBL00 KitchenAid Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I had a faulty wiring on the igniter switches.
12 of 18 people
found this instruction helpful.
-
Raymundo from Cerritos, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
replaced the set of igniter switches I order from Partselect .com.
Was this helpful?
Thank you for voting!
Plastic anchor tips broken.
3 of 4 people
found this instruction helpful.
-
Thomas from COLORADO SPGS, CO
- Very Easy
- Less than 15 mins
Removed the broken items and replaced.
Was this helpful?
Thank you for voting!
Knob skirt clips (2 of 4) broken
2 of 2 people
found this instruction helpful.
-
John from RAINIER, WA
- Really Easy
- Less than 15 mins
Gently pressed the lower two clips onto my thumbs as I pressed the skirt into the cooktop skirt hole. Be gentle or you can break the new skirt!
Was this helpful?
Thank you for voting!
Head burner had something spilled on it which stained it and left a large dark brown spot
6 of 14 people
found this instruction helpful.
-
Donald from Hudsonville, MI
- Really Easy
- Less than 15 mins
-
Screw drivers
Simply remove two screws take old one off and line up and put new one on and replace the two screws. Couldn't have been easier.
Was this helpful?
Thank you for voting!
Grommet broken
2 of 2 people
found this instruction helpful.
-
Ray from POST, TX
- Very Easy
- Less than 15 mins
Good
Was this helpful?
Thank you for voting!
the little tabs that hold the skirt in the hole break off
2 of 3 people
found this instruction helpful.
-
John from Sequim, WA
- Really Easy
- Less than 15 mins
I pulled the knobs off, lifted the broken skirts out and snapped the new ones in.
Was this helpful?
Thank you for voting!
backing for stovetop knobs
1 of 2 people
found this instruction helpful.
-
Norman from Tustin, CA
- Really Easy
- Less than 15 mins
the decorative backings on our stovetop knobs had become frayed, and I simply pried off the old ones,and installed the new ones. I have use Parts Select for years for various parts replacement, their service is quick and accurate. When I need a part, I always check here first.
Was this helpful?
Thank you for voting!
Stove top did not come with a gas regulator and nipple attachment
12 of 42 people
found this instruction helpful.
-
Linda from Colorado Springs, CO
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
A plummer did the repair.
Was this helpful?
Thank you for voting!
While remodeling my kitchen I threw way the caps for my new cooktop.
-
CAROL from BARTONVILLE, IL
- Really Easy
- Less than 15 mins
There wasn't really anything to fix. I just had to put the burner caps on. I will say though that the service that I got and the people I talked to on the phone were wonderful. I got what I requested the first time but it was not the right part. I then called and they let me return the wrong part and the second time the order was not
... Read more
correct. (my fault) They are not only sending me the correct part, but they also credited the shipping. I will definitely will use Part Select again.They were great.
Read less
Was this helpful?
Thank you for voting!
Old skirts tabs broke off with age
-
Leanne from Huntingtown, MD
- Really Easy
- Less than 15 mins
Just replaced them.
Was this helpful?
Thank you for voting!
change over from Natural Gas to LP and install cooktop from Electric to gas
-
Dan from Olalla, WA
- Really Easy
- Less than 15 mins
-
Socket set
removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.
Was this helpful?
Thank you for voting!