This Refrigerator Air Filter is a white 1.8x3.2" plastic filter which neutralizes odor and bacteria in the air. It should be replaced every six months at a minimum. Refer to your user manual and model number to see if this filter is right for your fridge. Location for storage of the air filter may vary from model to model, but generally, ...Read moreyou will find a small cover on the back-middle-top of your fridge, which can be popped off to reveal the air filter, which can be easily changed out from there. This part does not come sold with the indicator; it is the filter only. Sold individually.
This water filter is a genuine replacement for bottom-freezer refrigerators that accept a Filter 2. it is certified to remove up to 24 different contaminants which include pharmaceuticals, waterborne parasites, lead, and pesticides. The filter should be replaced every six months, or when 200 gallons of water have passed through, to ensure...Read more optimum contaminant reduction. The filter is found in the top right corner of your fridge, and replacing it is easy. Simply pop out the old one (keep a bucket underneath to catch any water) and slide in the new one. You will hear a click once it has locked into place. You should run water through the filter for a couple minutes prior to use. This filter measures approximately two inches wide, two inches deep, and 7.5 inches long.
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this p...Read moreart is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh for up to 4 days longer. It includes 2 packs of preserver and a status indicator strip. Replace every 6 months.
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
This part is a replacement refrigerator drive shaft seal for your refrigerator. The drive shaft seal protects the auger motor from water and condensation that may leak down the drive shaft from the ice bucket. If the seal is broken, water and condensation can get in, causing the ice maker to fail. To replace the seal, first remove the ice...Read more bucket from your freezer. Then remove the two screws on the drive shaft holder, and use a pair of pliers to remove the drive shaft. At this point you can remove the seal from the drive shaft. Be sure to clean the area that the seal sits in before you reinstall the drive shaft. This part is white in color and is about an inch in diameter. The seal is sold individually.
This ice container is the part of your freezer where freshly made ice is collected and stored, making it easy to grab cubes or crushed ice whenever you need it. It features a sturdy white base connected to a clear plastic bin, so you can see how much ice you have at a glance. Inside, there’s a metal rod called an auger that helps move the...Read more ice toward the dispenser. The container keeps ice neatly contained, preventing it from scattering around the freezer. If you’re dealing with leaks, trouble dispensing ice, or clumps of ice forming into large chunks, it’s probably time for a replacement. Swapping it out is simple—just remove the old bin and slide the new one into place. Be sure to check your refrigerator’s manual to make sure it’s the right fit.
This OEM, 120V, 60 HZ water inlet valve is specially designed for refrigerators. It is responsible for regulating the flow of water into the water dispenser and ice maker of the fridge. If your refrigerator is leaking or it is unable to dispense water, the water inlet valve may be damaged or experiencing electrical failure. It will need t...Read moreo be replaced to restore the functionality of the appliance. You can find the valve at the back of the refrigerator where it is connected to the water supply line.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John - For model number KFIS29BBMS02
September 6, 2022
Good Morning, I have been trying to narrow down my freezer issue with my fridge. Here are the symptoms: Freezer will not freeze, ice maker will not make any ice, fridge runs non stop, fridge stays cold, but freezer will not freeze at all. Condenser fan works and runs, condenser pump runs and the condenser coils are clean. I have cycled through the control board testing for codes and get no codes. It acts like the fridge has gone into defrost mode and wont come out. I can cycle the evaporator fan motor on to circulate air to the freezer but it is just cold air not freezing air. I have looked for videos and info for this problem and nothing seems to be out there about this situation. Could these be any of the causes? Temperature control, Thermistor, Defrost Sensor/control board? Is there suggestions you could help with for testing or parts from your site. I can not get a repair person her for over a month and have decide to tackle this myself. I have good mechanical knowledge, just never worked on appliances before. Thank you. John
Hello John, Thank you for the question. We suggest testing the Thermistor. The thermistor resistance would be 10K at 77 degrees, 29.5K at 36 Degrees and 86.3K at 0 Degrees. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We hope this helps!
My refrigerator lights are dim. Last time this happened, they pretty quickly went completely out.called a repair guy, and he replaced a freezer bulb to fix it. Can I just get a bulb and do it myself? If so cost /part number for the freezer bulb
Hello Brad, thank you for reaching out. You may need to replace the LED light module, part number PS11702378. Before replacing it, turn off the power to the appliance. Afterward, you will just need to depress the tab on the housing to release the light and housing and unplug the wire harness to remove it. We hope this helps!
How do I access the drip trays underneath? Next to condenser? I can't reach in very far but there appears to be green gunk in the tray.
Hi Barb, thank you for the question. With the refrigerator section cleared out, the appliance can be tilted forward just enough to remove the base pan screws, allowing the pan and the tray to move down. This will allow for the easiest replacement of the evaporating tray. We hope this helps.
Was this helpful?
Thank you for voting!
Rachael Brackbill - For model number KFIS29BBMS02
October 19, 2025
The right side door of my refrigerator was damaged/dented. Can I find a replacement door? I tried to fix but the dent is too significant. The refrigerator is awesome but the dent is not aesthetically pleasing. I need to fix or replace. All of my other appliances match which is why I’m reluctant to replace as this particular model is not produced anymore. What are my options?
Hi Rachael, thank you for reaching out. The right side door assembly for your model is part number PS5135827. We hope that helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lights inside refrigerator not working
137 of 257 peoplefound this instruction helpful.
Clint from Rayville, MO
Really Easy
Less than 15 mins
Screw drivers
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Was this helpful?
Thank you for voting!
Ice dispenser motor burnt out, water got inside.
86 of 129 peoplefound this instruction helpful.
Blye from Victoria, VA
Really Easy
1- 2 hours
Nutdriver, Screw drivers
Purchased new motor from Partselect.com. When it arrived it came with a new rubber washer that fitted on top of new motor that was not on old motor, that how water got into old motor. However, the instruction sheet did not give info on how to access the proper way to the motor that is the door. Not wanting to damage the freezer door assy.
... Read more called in a tech who made it look easy, but even he had a little problem locating access panel that was directly under the motor in the freezer side of the door. After that it was a piece of cake.
Read less
Was this helpful?
Thank you for voting!
while closing the door, the light switch fouled, resulting in the switch breaking
66 of 118 peoplefound this instruction helpful.
Kevin from Beckley, WV
Really Easy
Less than 15 mins
Screw drivers
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
My Orders
