This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fr...Read moreidge, a fridge that is not dispensing water (or reduced flow rate), and an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter. This water filter has been updated by the manufacturer. It may appear different but will still function the same. It is sold individually.
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this p...Read moreart is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.
The p-trap drain tube kit may also be known as the duck bill, or the drain pipe, and it is compatible with your refrigerator. The function of the p-trap drain kit is to carry the water that has formed during the defrost cycle to the bottom of the refrigerator, where your drain pan is located. The tools you will need for this repair includ...Read moree a 1/4-inch nut driver and a small flat-blade screwdriver. To do this repair you will need to pull the refrigerator forward in order to reach the lower access panel at the back. This kit includes the tube extension piece and spacer.
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help solve the issue. Replacing this part is easy and requires minimal disassembly of the refrigerator end cap handle. Your will need a screwdriver to complete this repair.
This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely through the dispensing system when the filter is not present. The bypass can fail if it becomes clogged, cracked, or falls out of alignment. A fa...Read moreulty filter bypass will result in leaking, poor ice production, and difficulties dispensing water. You can find the filter bypass inside the refrigerator, near the water filter housing. Disconnect the water supply lines and remove the faulty bypass. Insert the new bypass in its place and reconnect the water supply lines.
This is a replacement end cap for your refrigerator pantry drawer. The pantry drawer has an endcap on either side, which encloses the drawer. This end cap is for the left side of the pantry drawer only. Make sure you need the left side end cap before you order this part. This part is made of white plastic, and will fit into position on th...Read moree left side of the pantry drawer. This part is approximately 20 inches wide and 7 inches tall. It is an OEM part sourced directly from the manufacturer.
This part is the replacement for the end cap on your refrigerator pantry drawer. Your pantry drawer will have two end caps; one for the right side and one for the left. This is the end cap for the right-hand side, and is sold separately from the left end cap. The part is made of white plastic and is an OEM part sourced directly from the m...Read moreanufacturer. To remove the old pantry drawer end cap, simply remove the pantry drawer and disconnect the end cap. Replace it with a new one, and slide the pantry drawer back into place.
This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light is not working properly. In order to make this repair you will need a Phillips screwdriver, a pair of needle nose pliers, and a small flat b...Read morelade screwdriver. This light switch is almost 2 inches long, 1.5 inches wide, and just over an inch thick.
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part...Read more. Please be sure to disconnect the power to your refrigerator before starting your repair.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
2
3
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cluny - For model number KFCS22EVMS8
March 12, 2020
On the top shelf right at the back attached to the back of the fridge is a white box (not electronics on it). It is attached to the top of the fridge. This box is making a strange sound which has not happened before. Likely a fan or fliter having an issue (loud clicking noise). What do i do to check out what is happening and what replacement part do i need?
Hi Cluny,
Thank you for your question. In the top back corner of the refrigerator, the part you are referring to would be the compartment for the water filter. If you are hearing a noise from this compartment, this is caused by a change in pressure when water is used from the water tank of your refrigerator. This noise is normal and it will stop once the pressure has returned to normal. We hope this helps. Thank you and have a great day.
2 peoplefound this instruction helpful.
Was this helpful?
Thank you for voting!
Jerry - For model number KFCS22EVMS8
January 24, 2023
my freezer suddenly quite making ice.can you help?
Hello Jerry, thank you for contacting us. Please make sure the ice maker is getting water, if not the issue is probably related to a clogged water filter, part number PS11722130, or a defective water inlet valve, part number PS11754529. If that is not the case, we would suggest checking the ice maker assembly, part number PS11765709. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Refrigerator is ~ 7 years old. 4 years into it the ice maker stopped working. Ice cubes would get stuck in dispenser, jamming the dispenser and not allowing it to turn/drop fresh ice cubes in tray. I would have to reach in and unjam dispenser to make it work. I replaced ice maker with oem replacement part (full ice maker assembly), and it worked up until November last year. I purchased a second oem icemaker assembly, and it lasted about 3 months before the same issue of jamming presented itself. Freezer temp a 0. Any thoughts? Thanks in advance.
Hello Craig, Thank you for the question. This could also be caused by the Ice Maker getting too much water and over filling causing the ice cubes to jam. When changing out the Ice Maker it was unplugged and could have reset the Water Valve long enough for it to work for a bit. Please see the link below on testing the Water Valve. We hope this helps!
https://www.partselect.com/Refrigerator+test-water-valve+repair.htm
Fridge and freezer warm compressor is running 2 fans are working coils are clean can't find the problem
Hello Chris, Thank you for your inquiry. We have researched the model number that you have provided and would recommend checking the thermistor, the air damper control, the defrost heater, and the main control board. Also even though you stated that both fans were running, if the evaporator fan in the freezer is not producing cold air, we would still recommend checking it. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
What part numbers are the refrigerator French door gaskets? They need to be replaced. The left and right door have different gaskets.
Hi Bonnie, thank you for reaching out. The correct Door Gasket for both doors of your unit is part number PS12069725. These door gaskets are sold separately, so you will need to order two. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
light on to order water filter
916 of 1059 peoplefound this instruction helpful.
Douglas from Byron, NY
Really Easy
Less than 15 mins
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Was this helpful?
Thank you for voting!
Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.
216 of 335 peoplefound this instruction helpful.
Jake from Novato, CA
Easy
Less than 15 mins
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate
... Read moremotions and a steady thought process on the problem helped disengage the darned old filter!
Read less
Was this helpful?
Thank you for voting!
Needed to change water filter in refrigerator
163 of 258 peoplefound this instruction helpful.
Marilyn from Lilburn, GA
Really Easy
Less than 15 mins
The switch-out of the water filter was simple with good instructions on the box. The part was delivered very, very quickly!
My Orders
