Models
>
KESS907SSS04
KESS907SSS04 KitchenAid Range - Overview
Sections of the KESS907SSS04
[Viewing 8 of 8]
Manuals & Care Guides for KESS907SSS04
Click to downloadInstall
Installation Instructions
(1.41MB)
Install
Installation Instructions
(2.22MB)
Manual
Owner's Manuals
(1.45MB)
Manual
Owner's Manuals
(4.09MB)
Specs
Product Specifications Sheet
(0.37MB)
Keep searches simple, eg. "belt" or "pump".
Oven Rack
PartSelect #: PS11749669
Manufacturer #: WPW10179152
This oven rack is chrome in color and is approximately 24 inches wide by 16 inches deep. If your old oven rack is damaged, you should consider replacing it. Many of our customers have determined this ...
$77.75
In Stock
Screw
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$20.79
In Stock
Temperature Sensor
PartSelect #: PS11748765
Manufacturer #: WPW10131825
The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty tempe...
$87.78
In Stock
Element, Broil
PartSelect #: PS11747304
Manufacturer #: WP9760774
This broil element is found on the roof of the oven. The broil element is at the top of the oven and supplies the heat to broiling. 14" x 15" with 1-3/8" inserts.
This part works with the following...
$175.81
In Stock
Range High-Limit Thermostat
PartSelect #: PS11747248
Manufacturer #: WP9759242
This thermostat is also known as a thermal cut-off fuse and is used in conjunction with your range. This part establishes and maintains the internal temperature of the oven cavity. When the temperatur...
$56.26
In Stock
Terminal Block
PartSelect #: PS11750972
Manufacturer #: WPW10245259
This part is for oven ranges, it connects individual wires and protects the device from electrical surges, voltages, and current. With this part, the house power is connected to the range wire harness...
$33.26
In Stock
Touch-Up Paint - White
PartSelect #: PS385132
Manufacturer #: 72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
$6.10
In Stock
Light Bulb - 120-130V - 15W
PartSelect #: PS11742328
Manufacturer #: WP4173175
This part is a light bulb that is 120-130 volts and 15 watts, and is used in conjunction with your range or wall oven. The function of this bulb is to illuminate the interior of the oven.Before making...
$43.60
In Stock
Dual Surface Element - 2500w/1200w
PartSelect #: PS11764902
Manufacturer #: W10823692
This is the replacement large surface element for your cooktop or range. It is approximately 10-inches in diameter and is 1200/2500 watts. The large surface element is installed under the cooktop and ...
$210.57
In Stock
Temperature Probe
PartSelect #: PS11747165
Manufacturer #: WP9755542
Also known as a meat probe.
$90.57
In Stock
Screw
PartSelect #: PS11741605
Manufacturer #: WP3400832
This screw is sold individually.
$7.76
In Stock
Questions And Answers for KESS907SSS04
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
September 12, 2022
Left front burner eye red 'on light' flickers when on and eye comes on very hot even when turned to med or low then recedes to low or off. Temp level very erratic regardless of temp selected. Is eye burning out or temp control an issue? other?
For model number KESS907SSS04
Hello Scott, thank you for reaching out. According to our research on the model, the problem appears to be with the Range Surface Element Control Switch, part number PS11747407. Customer service is available 7 days a week if you need help placing an order. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Range Surface Element Control Switch
$188.68
In Stock
Kevin
October 13, 2022
Oven runs away with temperature. Display usually says preheating but doesn't reach displayed temp even though separate grill probe keeps climbing on the temp. No errors on display. Ohms reading on probe is 1087 at room temp. Looking for suggestions.
For model number KESS907SSS04
Hello Kevin, thank you for contacting us. We would recommend checking the following parts to fix your issue: Temperature Sensor, part number PS11748765, High Limit Thermostat, part number PS11747248, and Broil Element, part number PS11747304. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
Was this helpful?
Thank you for voting!
Related Parts:
Range High-Limit Thermostat
$56.26
In Stock
Element, Broil
$175.81
In Stock
Temperature Sensor
$87.78
In Stock
Lisa
January 22, 2020
Takes almost an hour to preheat oven to 350 degrees. What could be the problem and/or how do i troubleshoot?
For model number KESS907SSS04
Hello and thank you for writing.
It certainly sounds like it could be a faulty high limit thermostat PS11747248 and/or possibly a faulty temperature sensor PS11748765, you should check the part(s) for signs of damage, and replace as necessary. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
Related Parts:
Range High-Limit Thermostat
$56.26
In Stock
Temperature Sensor
$87.78
In Stock
John
February 13, 2020
Electric oven will not hold temp
For model number KESS907SSS04
Hello John, thank you for writing. It does sound like a temperature sensor issue. Measure the oven temperature sensor resistance using a volt/ohm meter. If the resistance isn’t 1080 ohms at room temperature (70 degrees F), replace the oven temperature sensor. If the oven temperature sensor resistance and wire harness connections are okay, replace the electronic oven control (EOC). Hope this helps!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the KESS907SSS04
[Viewing 10 of 10]Element will not heat
Fixed by
these parts
these parts
Show All
Little to no heat when baking
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Little to no heat when broiling
Fixed by
these parts
these parts
Show All
Oven is too hot
Fixed by
these parts
these parts
Show All
Door won’t open after self cleaning cycle
Fixed by
these parts
these parts
Show All
Oven not heating evenly
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Will not program
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Self Cleaning blows the thermostat fuse
Something Kitchen Aid wont tell you but running a self clean on this model stove blows the fuse located on the back of the stove.
First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.
This repair would have cost $164 through A&E factory service.
First I slid the stove out and removed the back of the stove held in place by 8 Phillips screws. The thermostat fuse is located near the top middle on the back of the stove. Remove the 2 screws holding it in place. Disconnect the wires, plug in the new part. Put it all back together. Job done in less than 30 minutes.
This repair would have cost $164 through A&E factory service.
Parts Used:
-
Joseph from Worthington, PA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
133 of 148 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Radiant element, 2400 watt, under Ceran glass cok top needed replacement.
turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done
Parts Used:
-
GEORGE from NEWNAN, GA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers
163 of 247 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bad Element
Bought new element and installed. Very simple. Used phillips
screw driver.
screw driver.
Parts Used:
-
Michael from Howell, MI
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
74 of 120 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
