EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KERC506 KitchenAid Range - Instructions

All Instructions for the KERC506
91 - 105 of 184

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven light not working
2 of 6 people found this instruction helpful.
  • Richard from Gaylord, MI
  • A Bit Difficult
  • 30 - 60 mins
  • Nutdriver, Screw drivers
replaced light socket but did not repair problem. must have burned the motherboard.


pleased with service from your company.
Was this helpful?
Thank you for voting!
the burner didn't work and digital part too
8 of 24 people found this instruction helpful.
  • Eduardo from Lenexa, KS
  • Easy
  • 30 - 60 mins
  • Wrench set
I used the digital multimeter for measure the voltage in the burner and in the digital part,I saw the electric cables
Was this helpful?
Thank you for voting!
broken inside glass
0 of 1 people found this instruction helpful.
  • mike from orland park, IL
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
After reading what other people did for this job I figured I could do this. The inside glass broke after liquid accidently hit the glass from basting.
Just followed the digram from the internet to show how the door and glass comes apart. The only thing I had to figure out was how to take the door off. And once I figured that out it went pretty easy.
The door comes off just by lifting up on the door and pulling out. Just make sure you put all your parts in order on how they come apart and just replace them them in that order.
Was this helpful?
Thank you for voting!
Block broke
1 of 4 people found this instruction helpful.
  • Edward from Crimora, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
Was this helpful?
Thank you for voting!
Inside Light would not work
2 of 7 people found this instruction helpful.
  • Dan from Caddo Mills, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Turned off CB for the oven,Remove the oven from the cabinet , remove the back of the oven, replaced the light Assembly. turned on CB for the oven, tested the light. and truned off the CB and replace the back and reinstalled the oven in the cabinet.
Was this helpful?
Thank you for voting!
light bulb went out in my oven
2 of 7 people found this instruction helpful.
  • Janet from Ada, MI
  • Really Easy
  • Less than 15 mins
My husband took the plastic cover off and took out old bulb and screwed in the new one. Then put the cover back on.
Was this helpful?
Thank you for voting!
oven light burnt out
3 of 10 people found this instruction helpful.
  • William from Schwenksville, PA
  • Easy
  • Less than 15 mins
1. Unscrewed glass cover on bulb
2. Removed old bulb
3. Screwed in new bulb
4. Replaced glass cover
5. Mixed drink & baked cupcakes
Was this helpful?
Thank you for voting!
Light burned out in upper oven
0 of 1 people found this instruction helpful.
  • Shirley from Las Vegas, NV
  • Really Easy
  • Less than 15 mins
Screwed in light bulb and glass protector
Was this helpful?
Thank you for voting!
replaced oven lightbulb
0 of 1 people found this instruction helpful.
  • peggy ann from forest city, NC
  • Really Easy
  • Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people found this instruction helpful.
  • Judith from Phoenix, AZ
  • Really Easy
  • Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
broken glass
0 of 2 people found this instruction helpful.
  • Rowenna from yukon, OK
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I refered to what I had read on repair stories of broken glass...then went to fixing mine and before I new it I was done and glass replaced...it was very easy as long as you watch what you are doing when u take it apart and replace things the same as they were removed......thank you
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people found this instruction helpful.
  • Howard from Boynton Beach, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
Was this helpful?
Thank you for voting!
Inner door glass
  • Anthony from East Islip, NY
  • Easy
  • 30 - 60 mins
  • Screw drivers
Took door apart no problem had a little trouble putting it back together just one piece I put back wrong had to start over not to bad still took less then one hour
Was this helpful?
Thank you for voting!
Oven Would Never Come Up To Set Temp
  • Dorance from Rock Hill, SC
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Sensor matched perfect, but had to pull large upper rear panel to find location. From there took a few minutes to reassemble back. Did not un hook gas but turned it off. Obviously unplugged power. Oven works fine.
Was this helpful?
Thank you for voting!
Door wouldn't close tight
  • Dale from Port Tobacco, MD
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
First of all I couldn't believe parts arrived next day. Parts solved the problem I was reluctant to believe new hinges would solve the problem. I installed the hinges in about 1 hour but I had door apart previously so I knew what I was doing. Now my wife is speaking to me again and she threw the wooden spoon away that she used to hold doo r closed. Just spent $100 dollars and saved $1600 thanks guys.
Was this helpful?
Thank you for voting!
All Instructions for the KERC506
91 - 105 of 184